Rotisseries, Rotisserie Parts & Baskets

View Cart | Checkout

Note: When ordering rotisserie components, please double check to insure they will fit your grill. They are designed to fit most grills but we don't know exactly which parts fit specific grills and can't guarantee the parts you order will fit your grill. Make sure spit rods are long enough by measuring the grill hood and allowing extra for the motor mounting bracket. If the parts you order don't work for you for some reason, you can simply return them for a refund less outgoing shipping charges. Must be in original packaging and in new saleable condition. Please see our Return Policy for more information.

Our Part#	Description	Illustration	Price

24764	Non-stick Chicken and Rib Basket Ideal for cooking chicken, ribs, and other meats and vegetables, with a gentle tumbling action Easy to use, locks on rotisserie spit rod with thumb screw (included) 12” long x 6” wide Dimensions: 6” x 12” Weight: 1.3	Click for photos	$20.32 Qty

24785	Rotisserie basket, non-stick * Perfect for cooking steaks, ribs, chops, fish, or chicken wings! * Lid adjusts to secure food while rotisserie is turning * Locks on spit rod with thumb screws * Spit rod not included * 14” x 7 1/2” x 2 1/8” Weight: 1.3		$25.70 Qty

60011	Universal black rotisserie mounting bracket kit. Includes: Rotisserie motor mounting bracket Rotisserie bushing bracket (for grills with no bushing notch in casting) Mounting screws Fits most gas grills Note: The pre-drilled holes in these mounting brackets are designed to accommodate as many existing hole patterns as possible. Still, it is possible that you may have to drill new holes. Weight: 0.6	Click for photos	$11.59 Qty

60012	Deluxe rotisserie replacement motor. AC motor with on/off switch & 6 ft. cord. Accepts standard square spit rods. Weight: 1.6		$44.57 Qty

60013	Premium rotisserie replacement motor. Commercial grade 304 stainless steel case. 43 pound spit capacity. Accepts a 5/16” standard square spit rod. Weight: 2.4		$119.26 Qty

60120	Two deluxe chrome plated 4-prong heavy duty meat forks for up to 5/16” spit rods. Be sure to check your spit rod dimensions as these meat forks will not fit the larger 5/8” spit rods used on Viking grills and others. Material: chrome steel Weight: 0.4		$7.71 Qty

60150	Two deluxe heavy duty chrome steel 4-prong meat forks for up to 1/2” spit rods. Be sure to check your spit rod dimensions as these meat forks will not fit the larger 5/8” spit rods used on Viking grills and others Material: stainless steel Weight: 0.9		$10.62 Qty

60215	Rotisserie counter balance. Fits spit rods up to 5/8”. Material: chrome steel Weight: 0.6		$10.62 Qty

BU-1	Nickel plated spit rod bushing. Accepts up to 5/16” square spit rods. Use with PH-1 spit rod handle. Material: Nickel plated steel Weight: 0.1		$2.09 Qty

BU-2	Nickel plated spit rod bushing. Accepts up to 3/8” square spit rods. Use with PH-1 spit rod handle. Material: Nickel plated steel Weight: 0.2		$4.37 Qty

CLA-AU0008	304 stainless steel rotisserie motor bracket to permit motor standoff from grill. Includes two stainless steel nuts and bolts. Made in USA. Dimensions: 6” x 2 15/16” Material: stainless steel Weight: 0.4	Click for photos	$6.84 Qty

CLA-MS0029	Stainless steel rotisserie bracket. Requires two holes drilled 1 3/16in on center. Made in USA. Dimensions: 3” x 2 1/2” Material: stainless steel Weight: 0.2	Click for photos	$7.07 Qty

MB-1B	Rotisserie motor bracket. Holds motor inverted Predrilled for universal fit Includes nuts and bolts Note: The pre-drilled holes in the MB-1B motor mounting bracket are designed to accommodate as many existing hole patterns as possible. Still, it is possible that you may have to drill new holes. Material: Nickel plated steel Weight: 0.2	Click for photos	$2.91 Qty

MB-2B	Rotisserie bushing bracket. For use on grills NOT having a bushing notch in casting Includes nuts and bolts Note: The pre-drilled holes in this mounting brackets are designed to accommodate as many existing hole patterns as possible. Still, it is possible that you may have to drill new holes. Material: Nickel plated steel Weight: 0.2	Click for photos	$2.91 Qty

MB-3B	Stainless steel rotisserie motor bracket. Holds motor inverted Provides shelf clearance on all models Includes nuts and bolts Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. Material: Stainless steel Weight: 0.3	Click for photos	$10.19 Qty

MH-3SSB	Set of two jumbo stainless steel meat forks. Very heavy 304 stainless steel construction. Fits up to 3/8” square spit rods. Be sure to check your spit rod dimensions as these meat forks will not fit the larger 5/8” spit rods used on some Viking grills and others. Material: stainless steel Weight: 1.0		$28.32 Qty

RK-MHP	Universal rotisserie kit. Includes: R06 stainless steel motor SR-5 31” X 5/16” spit rod BU-1 spit rod bushing PH-1 spit rod handle MH-1B Chrome-plated meat forks MB-3B Inverted motor mounting bracket and screws MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting) Maximum 25 lbs. balanced load Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering. Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. NOTE: This kit does NOT include spit counter balance RCB-B, which should be used to insure even weight distribution. NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” rod, will not work with some of the parts in this kit. Weight: 4.6		$86.82 Qty

RK-MHP36	Universal rotisserie kit. Same as RK-MHP except with longer 36” spit rod. Includes: R06 stainless steel motor SR-8 36” X 5/16” spit rod BU-1 spit rod bushing PH-1 spit rod handle MH-1B Chrome-plated meat forks MB-3B Inverted motor mounting bracket and screws MB-2B Rotisserie bushing bracket (for grills with no bushing notch in casting) Maximum 25 lbs. balanced load Fits grills with hoods up to 31 inches wide. Be sure to measure before ordering. Note: The pre-drilled mounting holes in the MB-3B rotisserie motor mounting bracket are designed to accommodate existing hole patterns approximately 1 3/8” apart. It is possible that you may have to drill new holes. NOTE: This kit does NOT include spit counter balance RCB-B, which should be used to insure even weight distribution. NOTE: Some of the parts in the kit are designed for a 5/16” rod. Rod SR-43, which is a 3/8” rod, will not work with some of the parts in this kit. Weight: 4.6		$89.73 Qty

RO-4	Durable battery operated universal rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included). Weight: 1.0		$21.39 Qty

RO-6	Heavy duty stainless steel case universal rotisserie motor. on-off switch and 3 foot cord. Maximum 25 lb. balanced load. 6 1/4” x 4” x 2 1/8” Material: Stainless steel case Weight: 2.0		$63.05 Qty

SR-43	Heavy duty nickel plated 43” x 3/8” square spit rod. Fits many larger grills. Tip is tapered to 5/16” square to fit many rotisserie motors, including all of ours. Rod only. Fits grills with hoods up to 38 inches wide. Be sure to measure before ordering. NOTE: At 3/8”, the SR-43 rod is slightly thicker than our other rods and will not work with some of the parts in the RK-MHP and RK-MHP36 rotisserie kits, which are designed for the smaller 5/16” rods. The following parts will work on the SR-43 rod: Both motors 60013 and RO-6 Meat forks 60150 Counter balance 60215 Spit rod bushing BU-2 Spit rod handle PH-1. Dimensions: 43” x 3/8” Material: Nickel plated steel Weight: 1.7		$18.43 Qty

SR-5	Universal nickel plated 31” x 5/16” square spit rod. The following parts will work on the SR-5 rod: Motors: All Meat forks: 60120, 60150, and MH-3SSB Counter balance: RCB-B Spit rod bushing BU-1 Spit rod handle PH-1. Fits grills with hoods up to 26 inches wide. Be sure to measure before ordering. Dimensions: 31” x 5/16” Material: Nickel plated steel Weight: 0.8		$8.73 Qty

SR-8	Universal nickel plated 36” x 5/16” square spit rod. Longer version of SR-5. The following parts will work on the SR-8 rod: Motors: All Meat forks: 60120, 60150, and MH-3SSB Counter balance: RCB-B Spit rod bushing BU-1 Spit rod handle PH-1. Fits grills with hoods up to 31 inches wide. Be sure to measure before ordering. Dimensions: 36” x 5/16” Material: Nickel plated steel Weight: 0.9		$9.70 Qty

USA shipping (contiguous 48 states only) for grill part orders over $25