Every Miscellaneous Repair Part we have

Genuine OEM stainless steel baffle for Turbo control panel.

Part Number: 100743
Dimensions: 5” x 18 1/2”
Material: stainless steel
Weight: 0.3

ALIGNMENT, BRACKET BLACK

Part Number: 10184-E691
Weight: 1.0

TANK RETAINER-PEDESTAL-NEW

Part Number: 10184-R19
Weight: 1.0

Genuine OEM Cover, side burner.

Part Number: 10393-K40
Dimensions: 14 7/8” x 11”
Material: stainless steel
Weight: 1.9

Genuine OEM caster bracket

Part Number: 21039-905
Dimensions: 22 5/8” x 4 1/2”
Weight: 2.6

Genuine OEM control panel heat shield, for 3-Burner grills. One required per grill.

Part Number: 22004-91
Weight: 1.3

Control panel heat shield. One required per grill.

Part Number: 22005-91
Weight: 1.3

SHELF STRAP BLK RESIN

Part Number: 23009-608
Weight: 1.0

RING LID HANDLE GPB

Part Number: 239-C501
Weight: 0.11

OVEN LIGHT *

Part Number: 25020-71
Weight: 1.0

WIND SHIELD REAR BURNER GPB

Part Number: 393-C441
Weight: 0.11

LARGE PATRIOT NAMEPLATE

Part Number: 44089-60
Weight: 1.0

Front clip-on shelf made specifically for Grillmaster model 720-0697 as an extra front workspace. Includes three pieces with nuts and bolts for assembly. Instructions included.

Dimensions:

• Side-To-Side: 26 7/16”
• Front-To-Back: 10 1/16”
• Height: 6”

Made in USA

Part Number: CLA-AS0218
Dimensions: 10 1/16” x 26 7/16”
Material: stainless steel
Weight: 3.45

Front clip-on shelf made specifically for Master Forge model SH3118B as an extra front workspace. Includes three pieces with nuts and bolts for assembly. Instructions included.
Made in USA

Part Number: CLA-AS0221
Dimensions: 11” x 19 1/2”
Material: stainless steel
Weight: 2.85

Stainless steel lid hinge bracket. Sold individually, used in pairs of two. Made in USA .

Part Number: CLA-MS0013
Material: stainless steel
Weight: 0.02

Front and back burner mounting brackets for center-fed stainless U burner part# 15481 and VIKU1. Does not include screws. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0059
Material: stainless steel
Weight: 0.4

Electrode heat shield. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

Stainless steel electrode shield. Made in USA

Part Number: CLA-MS0091
Dimensions: 14 1/8” x 3 3/8”
Material: stainless steel
Weight: 0.4

Stainless steel front heat plate mounting bracket. Known to fit models SLG2007D and SLG2007DN. May fit other 5-Burner models, measure to confirm fit. Made in USA

Part Number: CLA-MS0095
Dimensions: 31 1/2”
Material: stainless steel
Weight: 0.35

Stainless steel rear heat plate mounting bracket. Known to fit models SLG2007D and SLG2007DN. May fit other 5-Burner models, measure to confirm fit. Made in USA

Part Number: CLA-MS0096
Dimensions: 30 3/4”
Material: stainless steel
Weight: 0.4

Stainless steel support bracket for cooking grids. Supports either upper or lower grid set. Includes four mounting nuts and bolts. Made in USA

Part Number: CLA-MS0126
Dimensions: 25 3/4” x 2 11/16”
Material: stainless steel
Weight: 1.02

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

• Drawer with handle
• Drawer cover
• Mounting hardware and instructions
• Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

Heat plate bracket, stainless steel. Made in USA

Part Number: CLA-MS0288
Dimensions: 23
Material: stainless steel
Weight: .75

2-Burner Z bar.

• Replaces OEM part# 40335008
• Stainless steel
• Made in USA

Part Number: CLA-MS0303
Dimensions: 3 5/8” x 7 7/16”
Material: Stainless Steel
Weight: 0.25

Stainless steel flavor grid, ignitor cover, bottom, angle. Replaces OEM # 5304444398. Made in USA

Part Number: CLA-MS0306
Dimensions: 3 7/16” x 24 15/16”
Material: Stainless Steel
Weight: 0.65

Lower heat shield; lay on existing heat shield. Dimensions of shield without brackets 13 7/8” x 15 3/8.” Made in USA

Part Number: CLA-MS0317
Dimensions: 13 7/8” x 16 3/4”
Material: stainless steel
Weight: 2.10

Back burner bracket, stainless steel (lay on top of existing bracket). Made in USA

Part Number: CLA-MS0318
Material: stainless steel
Weight: .75

Lower heat shield also known as firebox bottom panel. Replacement for OEM # B06W1B-6-B11. Made in USA

Part Number: CLA-MS0320
Material: stainless steel
Weight: 1.75

Bracket for heat plates, screws & nuts included. Four needed per grill, SOLD INDIVIDUALLY. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0330
Dimensions: 2 5/8” x 1 1/16”
Material: stainless steel
Weight: 0.05

214331-R CHIP TRAY W/A.
Stainless steel chip tray.

Fits DCS BGA36, BGA48, BGB36 and BGB48 Professional Series grills. Replaces original DCS part# 214331.

.

Part Number: DCS-214331-R
Material: stainless steel
Weight: 0.40

32038-R Smoker burner tray.
Stainless steel wood chip tray for smoking.

Fits DCS 36A and48A Professional Series grills by Dymaniv Cooking Systems. Replaces original DCS part# 32038.

.

Part Number: DCS-32038-R
Material: stainless steel
Weight: 0.40

32957-R Chip Tray.
Stainless steel wood chip tray for smoker.

Fits DCS BGA36, BGA48, BGB36 and BGB48 Professional Series grills. Replaces original DCS part# 32957.

.

Part Number: DCS-32957-R
Material: stainless steel
Weight: 0.40

Hinge pin clip.

Part Number: S21233
Weight: 0.01

Washer

Part Number: S21255
Weight: 0.01

Leg end cap.

Part Number: S21346
Weight: 0.1

Cap stepped end leg plug.

Part Number: S21350
Weight: 0.1

REAR BURNER SPRING

Part Number: S21362
Weight: 1.0

Push nut 3/8

Part Number: S21420
Weight: 0.1

HEAT SHIELD FIESTA 240/300 -- (2011)

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

SMART ROD 345/400/450

Part Number: SM68-6
Dimensions: 12
Weight: 0.3

BRACKET GREASE RAIL RHS

Part Number: SP155-6
Weight: 0.05

Cotter pin

Part Number: Y-11230
Weight: 0.01

Leg plug extension.

Part Number: Y-12665
Weight: 0.1

Bolt

Part Number: Y-6616
Weight: 0.02