Replacement BBQ grill parts for
Great Outdoors model: 8000N

View Cart | Checkout

To help insure that you get the correct replacement parts for your Great Outdoors grill, we highly recommend that you measure your original parts and compare them to what we have listed below. This is best done with the parts out of the grill. Verify your model number. The information shown below for the Great Outdoors model 8000N is the latest we have and believed to be accurate.

Back to Great Outdoors parts home

Our Part#	Description	Illustration	Price

14913	2 Piece stainless steel basting set for convenient grillside basting. * Measurements inside bowl for accurate sauce preperation * Stainless steel bowl * Hardwood handle brush Weight: 0.4		$16.44 Qty

Q24-CP-KZ	All metal 2 1/4” diameter control knob for Great Outdoors model 8000N. Unlike most plastic knobs on the market today, these super heavy-duty knobs are made of solid cast zinc and weigh nearly a half pound each. Fits 7mm valve shaft. Weight: 0.4	Click for photos	$14.94 Qty

CLA-BI0013 Replaces Great Outdoors part# AZ001503, AZ000303	Large exact fit cast iron burner for Great Outdoors model 8000N. Replaces original cast brass burner. Includes burner and venturi mounting bolts/screws. NOTE: Unlike other replacement H burners available for the Great Outdoors grills, this burner was made specifically for these grills and is an exact fit replacement part that will bolt right in and line up perfectly. Burner only, no venturi. Please be sure you don't need new venturis. About half the time you will. Sold individually, number required varies by grill. Dimensions: 16 7/8” x 7 1/2” Material: cast iron Weight: 8.5	Click for photos	$63.55 Qty

CLA-RX0010	Carbon steel rock grate with 1/4” rods for Great Outdoors model 8000N. Dimension Front-to-Back: 14 3/4” Dimension Side-to-Side: 22 5/8” Material: carbon steel Weight: 5.3	Click for photos	$19.21 Qty

02552	Silver plastic control knob for Great Outdoors model 8000N. Replaces original part# 50002552. Can also be used to replace knob part# AZ000703. Weight: 0.1	Click for photos	$5.33 Qty

03220	Rotary piezo spark generator for Great Outdoors model 8000N. Two round connector leads send spark to both main burners. Use with two 03400 wires. Weight: 0.2	Click for photos	$20.85 Qty

10502-75062 Replaces Great Outdoors part# AZ001503, AZ000506, AZ000303, AZ000503	Stainless steel H burner and venturi assembly for Great Outdoors model 8000N. While this burner will work, it is not an equivelant replacement for the original burner. Please see our ”perfect fit” cast iron replacement burner CLA-BI0013 below. For those who absolutely prefer stainless steel burners, the 10502 will work. It is somewhat smaller and can't be bolted down because the ”feet” are not threaded and are not in the same place as the original. Dimensions: 15 7/8” x 8” Material: stainless steel Weight: 3.5	Click for photos	$58.40 Qty

10502 Replaces Great Outdoors part# AZ001503, AZ000303	Stainless steel H burner for Great Outdoors model 8000N. While this burner will work, it is not an equivelant replacement for the original burner. Please see our ”perfect fit” cast iron replacement burner CLA-BI0013 below. For those who absolutely prefer stainless steel burners, the 10502 will work. It is somewhat smaller and can't be bolted down because the ”feet” are not threaded and are not in the same place as the original. Burner only, no venturi. Please be sure you don't need new venturis. About half the time you will. Dimensions: 15 7/8” x 8” Material: stainless steel Weight: 2.3		$43.61 Qty

75062 Replaces Great Outdoors part# AZ000506, AZ000503	special twin venturi for Great Outdoors model 8000N. Includes all necessary gaskets and screws/nuts. Dimensions: 1 1/2” x 5 1/2” Material: zinc plated steel Weight: 0.5		$16.44 Qty

34100	T manifold for twin valves with 3/8” male flare for Great Outdoors model 8000N. Use with hose & regulator #80012. Material: brass Weight: 0.3		$13.53 Qty

50061	60” Wide economy grill cover for Great Outdoors model 8000N. 8 gauge vinyl with felt backing and velcro closures. Please measure your grill to determine which cover fits best. Avoid too snug a fit as a slightly oversized cover is easier to take off and put back on. Dimensions: 60” wide (left to right) 20” deep (front-to-back) 35” high (top to bottom) Weight: 3.5	Click for photos	$40.25 Qty

50161	60” Wide deluxe grill cover for Great Outdoors model 8000N. 10 gauge vinyl with felt backing and velcro closures. Please measure your grill to determine which cover fits best. Avoid too snug a fit as a slightly oversized cover is easier to take off and put back on. Dimensions: 60” wide (left to right) 20” deep (front-to-back) 40” high (top to bottom) TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving late November. Weight: 4.0	Click for photos	$59.65 Qty

51022 Replaces Great Outdoors part# AF000102, AZ001600	Porcelain steel cooking grids (set of 2) for Great Outdoors model 8000N. Porcelain enameled, glossy finish. Dimension Front-to-Back: 17” Dimension Side-to-Side: 25” Material: porcelain steel wire Weight: 11.0		$77.11 Qty

80012	24” LP hose with QCC-1 type one regulator for Great Outdoors model 8000N. For use on ”new style” tanks. Use with 34100 twin manifold. Weight: 0.9	Click for photos	$36.81 Qty

77336	curved handle grill brush. 10.5”, plastic with brass bristles and scraper. Weight: 0.3		$6.30 Qty

41651	Pyromid® Briquettes. 7 lb. bag of loose red pyramid shaped permanent briquettes. Non-porous, retains heat longer with even heat distribution. Loosely placed, covers approximately 275 sq. inches, or an area about 14” x 20”. TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving late November. Dimensions: 1 7/8” x 1 7/8” Weight: 7.3		$23.96 Qty

00220	Texas hickory flavor wood chips. 800g. Weight: 2.0		$5.33 Qty

45887	7 lb. bag of natural lava rock, processed and screened for uniformity. Loosely placed, covers approximately 300 sq. inches, or an area about 14” x 21”. Weight: 7.3		$13.53 Qty