Repair parts for Kenmore grills

Our Part#	Description	Illustration	Price
00110	Universal control knob with extra long 1” shaft for some Kenmore grills. Counter-clockwise bezel. Selectable off position (12, 3, 6 & 9 o’clock). 8mm socket diameter. Weight: 0.1	Click for photos	$5.33 Qty
00120	Control knob with long shaft for some Kenmore grills. 6.8mm socket diameter. Weight: 0.1	Click for photos	$5.33 Qty
01000	24” LP hose with 3/8” male pipe thread (MPT) on one end, 3/8” female flare fitting on the other for some Kenmore grills. Weight: 0.4	Click for photos	$12.56 Qty
01190	Replacement electrode for some Kenmore grills. Ceramic insulator 25” wire with female spade connector Locking nuts. Weight: 0.1	Click for photos	$10.18 Qty
01200	Universal 24” hardwood front lid handle for some Kenmore grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart. Dimensions: 24” x NA Weight: 0.6	Click for photos	$16.44 Qty
01500	4” diameter, 48” tall natural gas post without internals for some Kenmore grills. Equivalent to Harpco #7402S0030 and MHP #P-4. Fits Arkla Dimensions: 48” x 4” Weight: 9.8		$87.25 Qty
02341	Universal plastic control knob, chrome and black for some Kenmore grills. Provided with four inserts for selectable D value and socket dimensions. Fits any grill with inside bezel diameter greater than 2 3/16”. Weight: 0.1	Click for photos	$8.68 Qty
02342	universal control knob for some Kenmore grills. Provided with six inserts for selectable D value and scocket dimensions. TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving mid October. Weight: 0.3		$8.68 Qty
02618	ignitor collector box with electrode for some Kenmore grills. Weight: 0.2	Click for photos	$11.59 Qty
02623	Ignitor collector box with electrode and round connector for some Kenmore grills. Use original connecting wire. Weight: 0.2	Click for photos	$7.66 Qty
03120	push-button piezo plunger with external grounding prong and mounting nut for some Kenmore grills. Grounding prong may also be used to conduct charge to a secondary electrode in grills with a side burner. Weight: 0.1	Click for photos	$9.21 Qty
03300	Battery powered push button spark generator with single round connector for some Kenmore grills. Installs behind the control panel, replacing a piezo plunger. Fits most grills that use a push-button piezo plunger. Uses a single AA battery (not included).) Requires 3/4” mounting hole Weight: 0.2	Click for photos	$37.34 Qty
03340	Universal battery powered push button ignitor for some Kenmore grills. Has four (4) male spade connectors Uses a single AA battery (not included) 03610 and 03620 wires are commonly used with this igniter (not included) Requires 7/8” mounting hole Weight: 0.5	Click for photos	$31.52 Qty
03350	Universal battery powered push button ignitor for some Kenmore grills. Has six (6) male spade connectors Uses a single AA battery (not included)) 03610 and 03620 wires are commonly used with this igniter (not included) Requires 7/8” mounting hole Weight: 0.5	Click for photos	$32.49 Qty
03400	20” wire with female spade connector and round connector for some Kenmore grills. Weight: 0.1	Click for photos	$4.36 Qty
03430	Black control knob to fit Kenmore models for some Kenmore grills. Weight: 0.2	Click for photos	$8.68 Qty
03500	20” wire with two female spade connectors for side burner igniters for some Kenmore grills. Weight: 0.1	Click for photos	$4.36 Qty
03610	47” wire with female spade connector and square plastic connectors for some Kenmore grills. Used with battery powered spark generators. Weight: 0.1	Click for photos	$6.74 Qty
03620	14” ground wire with female spade connector and eye connectors for some Kenmore grills. For use with 1.5 volt spark generators including 03340 and 03350. Weight: 0.1		$5.33 Qty
03700	ceramic electrode with bendable wire, mounting bracket, and male spade connector for some Kenmore grills. Weight: 0.1	Click for photos	$6.30 Qty
03800	Collector box and ceramic electrode with male spade connector for some Kenmore grills. Mounts perpendicular through casting with threaded rod and locking nuts. Includes igniter ground lug, no wire. Weight: 0.2	Click for photos	$9.21 Qty
03900	Collector box and electrode assembly for some Kenmore grills. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female round connector. Not designed to mount on original equipment burners. Fits our stainless steel H burners with special mounting bracket. Weight: 0.2	Click for photos	$10.18 Qty
04010	Burner mounted electrode for some Kenmore grills. Mounts to flange on underside of burner. Ceramic insulator Mounting bracket with nut and bolt Male spade connector Weight: 0.1	Click for photos	$6.30 Qty
04022	Burner mounted electrode for some Kenmore grills. Used with burners 10221 and 16231, and wire 03610. Ceramic insulator Mounting bracket with nut and bolt Male spade connector Weight: 0.1	Click for photos	$7.27 Qty
04400	Collector box for Charbroil models using burner 115C2 and 12012 for some Kenmore grills. Attaches directly to burner. Use with 04500 ceramic electrode. Weight: 0.1	Click for photos	$5.33 Qty
04410	Burner mounted electrode kit for models with U-shaped burners 13702, 13802, 13902 for some Kenmore grills. Mounting bracket with screw Electrode with ceramic insulator Male spade connector Weight: 0.1	Click for photos	$9.21 Qty
04420	Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners for some Kenmore grills. Attaches directly to burner. Weight: 0.1	Click for photos	$9.21 Qty
04430	Burner mounted electrode for use with 15591 and 15491 burners for some Kenmore grills. Ceramic insulator 12” wire with female spade connector Protective sleeve Weight: 0.1	Click for photos	$11.15 Qty
04500	Ceramic electrode with protective sleeve and male spade connector for some Kenmore grills. Use with collector box 04400. Weight: 0.1	Click for photos	$6.30 Qty
04700	Universal ignitor bracket with collector box, ceramic electrode, 20” insulated wire, and female connector compatible with most piezos for some Kenmore grills. Fits all H burners, both cast iron and stainless steel. Mounts to burner using venturi screws. Slot allows adjustment of electrode position. Weight: 0.1	Click for photos	$14.06 Qty
04800	collector box and electrode assembly for use with Weber models with spark generators that have an external grounding prong for some Kenmore grills. Includes mounting tabs to facilitate installation. Weight: 0.1	Click for photos	$12.12 Qty
20610	Universal push button igniter kit with instructions for some Kenmore grills. Includes plunger, wire, and two electrodes (one venturi mounted, one with collector box). Designed primarily for older, single burner aluminum grills. Weight: 0.3	Click for photos	$24.73 Qty
20612	Meat probe/heat indicator for some Kenmore grills. Use mounted to grill or as a meat thermometer. 3” probe. CLEARANCE/CLOSEOUT ITEM This item has been reduced for clearance. Weight: 0.1	Click for photos	$25.17 $14.95 Qty
21217	Deluxe lid mounted heat indicator with chrome trim for some Kenmore grills. Requires three holes, two mounting holes plus center hole. Weight: 0.2	Click for photos	$16.00 Qty
25950	Hardwood lid handle for some Kenmore grills. Weight: 0.2		$7.71 Qty
70002	Spider exclusion screens for some Kenmore grills. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long. Dimensions: 1” x 7/8” Weight: 0.1	Click for photos	$6.74 Qty
80004	4 foot Flexible adapter hose connects the appliance to standard propane bottle with POL connection for some Kenmore grills. Can be used to connect table top grills, camping stoves, and other appliances designed to use disposable LP bottles to standard 20lb LP tanks. Weight: 0.8	Click for photos	$27.11 Qty
80012	24” LP hose and regulator with QCC-1 connection for some Kenmore grills. For use on ”new style” QCC-1 tanks. Consists of hose part# 01000 and regulator part# 00920. Hose end with SAE 3/8” female flare fitting connects to grill. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 0.9	Click for photos	$36.81 Qty
80024	24” LP hose and regulator with POL connection for some Kenmore grills. For use on ”old style” POL tanks. Consists of hose part# 01000 and regulator part# 00900. Hose end  with SAE 3/8” female flare fitting connects to grill. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 0.9	Click for photos	$33.90 Qty
80034	LP regulator with QCC-1 connection and two 24” hoses for some side burner applications for some Kenmore grills. For use on ”new style” QCC-1 tanks. Total length is 49” Both hose ends are SAE 3/8” female flare fittings. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 1.2	Click for photos	$46.51 Qty
80144	12 foot natural gas hose with brass quick-connect coupling for some Kenmore grills. Consists of hose part# 81442 and coupling part# 81441. The hose end with SAE 3/8” female flare fitting connects to grill. The other hose end, the quick-connect end (with coupler attached), has a 3/8” female pipe thread and connects to the gas supply. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 3.7	Click for photos	$92.10 Qty
80830	30” hose for many side burner applications for some Kenmore grills. One hose end 3/8” female pipe thread (FPT) Other hose end is 3/8” male pipe thread (MPT) Includes 3/8” FPT to 1/4” FPT reducer Includes 1/4” FPT to 1/8” MPT nipple for Weber and others Weight: 0.4	Click for photos	$14.50 Qty
81441	Brass natural gas quick connect coupling for some Kenmore grills. Use with hose #81442. Coupling and hose also available together as part# 80144. See description of part# 80144 for more information and pictures of how part couples with hose. Weight: 0.4	Click for photos	$38.75 Qty
81442	12 foot natural gas quick-connect hose for some Kenmore grills. The hose end with SAE 3/8” female flare fitting connects to grill. Designed for use with quick connect coupling part# 81441 Hose and coupling also available together as part# 80144. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 2.9		$55.24 Qty
81809	brass fitting for converting side burners from natural gas to LP for some Kenmore grills. Weight: 0.4		$13.53 Qty
82425	24” stainless steel spring hose protector for some Kenmore grills. Weight: 0.5		$24.20 Qty
86328	male plug for LP quick connect fitting for some Kenmore grills. Replaces 510 POL. Weight: 0.1		$9.21 Qty
IGEIB4-B	Battery powered push button igniter for some Kenmore grills. Has four (4) spade type male connectors. Uses 1 AAA battery (not supplied) Requires 3/4” or 13/16” mounting hole. TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving mid October. Weight: 0.3	Click for photos	$25.95 Qty
PLT	Front cover plate for P-4 posts for some Kenmore grills. Heavy gauge electro galvanized steel. Material: Painted galvanized steel Weight: 1.0	Image not available	$7.28 Qty

* Internet part orders over $25 shipped to the USA (contiguous 48 states only)

All trademarks property of their respective owners