Repair parts for Kirkland Signature grills

Our Part#	Description	Illustration	Price
00110	Universal control knob with extra long 1” shaft for some Kirkland Signature grills. Counter-clockwise bezel. Selectable off position (12, 3, 6 & 9 o’clock). 8mm socket diameter. Weight: 0.1	Click for photos	$5.33 Qty
01000	24” LP hose with 3/8” male pipe thread (MPT) on one end, 3/8” female flare fitting on the other for some Kirkland Signature grills. Weight: 0.4	Click for photos	$12.56 Qty
01190	Replacement electrode for some Kirkland Signature grills. Ceramic insulator 25” wire with female spade connector Locking nuts. Weight: 0.1	Click for photos	$10.18 Qty
01200	Universal 24” hardwood front lid handle for some Kirkland Signature grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart. Dimensions: 24” x NA Weight: 0.6	Click for photos	$16.44 Qty
03300	Battery powered push button spark generator with single round connector for some Kirkland Signature grills. Installs behind the control panel, replacing a piezo plunger. Fits most grills that use a push-button piezo plunger. Uses a single AA battery (not included).) Requires 3/4” mounting hole Weight: 0.2	Click for photos	$37.34 Qty
03340	Universal battery powered push button ignitor for some Kirkland Signature grills. Has four (4) male spade connectors Uses a single AA battery (not included) 03610 and 03620 wires are commonly used with this igniter (not included) Requires 7/8” mounting hole Weight: 0.5	Click for photos	$31.52 Qty
03350	Universal battery powered push button ignitor for some Kirkland Signature grills. Has six (6) male spade connectors Uses a single AA battery (not included)) 03610 and 03620 wires are commonly used with this igniter (not included) Requires 7/8” mounting hole Weight: 0.5	Click for photos	$32.49 Qty
03351	Burner mounted replacement electrode for use with burner 15641 for some Kirkland Signature grills. Ceramic insulator Wire with female spade connector Weight: 0.1	Click for photos	$11.15 Qty
03400	20” wire with female spade connector and round connector for some Kirkland Signature grills. Weight: 0.1	Click for photos	$4.36 Qty
03500	20” wire with two female spade connectors for side burner igniters for some Kirkland Signature grills. Weight: 0.1	Click for photos	$4.36 Qty
03610	47” wire with female spade connector and square plastic connectors for some Kirkland Signature grills. Used with battery powered spark generators. Weight: 0.1	Click for photos	$6.74 Qty
04010	Burner mounted electrode for some Kirkland Signature grills. Mounts to flange on underside of burner. Ceramic insulator Mounting bracket with nut and bolt Male spade connector Weight: 0.1	Click for photos	$6.30 Qty
20610	Universal push button igniter kit with instructions for some Kirkland Signature grills. Includes plunger, wire, and two electrodes (one venturi mounted, one with collector box). Designed primarily for older, single burner aluminum grills. Weight: 0.3	Click for photos	$24.73 Qty
20612	Meat probe/heat indicator for some Kirkland Signature grills. Use mounted to grill or as a meat thermometer. 3” probe. CLEARANCE/CLOSEOUT ITEM This item has been reduced for clearance. Weight: 0.1	Click for photos	$25.17 $14.95 Qty
21217	Deluxe lid mounted heat indicator with chrome trim for some Kirkland Signature grills. Requires three holes, two mounting holes plus center hole. Weight: 0.2	Click for photos	$16.00 Qty
25950	Hardwood lid handle for some Kirkland Signature grills. Weight: 0.2	Click for photos	$7.71 Qty
70002	Spider exclusion screens for some Kirkland Signature grills. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long. Dimensions: 1” x 7/8” Weight: 0.1	Click for photos	$6.74 Qty
80004	4 foot Flexible adapter hose connects the appliance to standard propane bottle with POL connection for some Kirkland Signature grills. Can be used to connect table top grills, camping stoves, and other appliances designed to use disposable LP bottles to standard 20lb LP tanks. Weight: 0.8	Click for photos	$27.11 Qty
80012	24” LP hose and regulator with QCC-1 connection for some Kirkland Signature grills. For use on ”new style” QCC-1 tanks. Consists of hose part# 01000 and regulator part# 00920. Hose end with SAE 3/8” female flare fitting connects to grill. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 0.9	Click for photos	$36.81 Qty
80024	24” LP hose and regulator with POL connection for some Kirkland Signature grills. For use on ”old style” POL tanks. Consists of hose part# 01000 and regulator part# 00900. Hose end  with SAE 3/8” female flare fitting connects to grill. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 0.9	Click for photos	$33.90 Qty
80034	LP regulator with QCC-1 connection and two 24” hoses for some side burner applications for some Kirkland Signature grills. For use on ”new style” QCC-1 tanks. Total length is 49” Both hose ends are SAE 3/8” female flare fittings. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 1.2	Click for photos	$46.51 Qty
80144	12 foot natural gas hose with brass quick-connect coupling for some Kirkland Signature grills. Consists of hose part# 81442 and coupling part# 81441. The hose end with SAE 3/8” female flare fitting connects to grill. The other hose end, the quick-connect end (with coupler attached), has a 3/8” female pipe thread and connects to the gas supply. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 3.7	Click for photos	$92.10 Qty
80830	30” hose for many side burner applications for some Kirkland Signature grills. One hose end 3/8” female pipe thread (FPT) Other hose end is 3/8” male pipe thread (MPT) Includes 3/8” FPT to 1/4” FPT reducer Includes 1/4” FPT to 1/8” MPT nipple for Weber and others Weight: 0.4	Click for photos	$14.50 Qty
81441	Brass natural gas quick connect coupling for some Kirkland Signature grills. Use with hose #81442. Coupling and hose also available together as part# 80144. See description of part# 80144 for more information and pictures of how part couples with hose. Weight: 0.4	Click for photos	$38.75 Qty
81442	12 foot natural gas quick-connect hose for some Kirkland Signature grills. The hose end with SAE 3/8” female flare fitting connects to grill. Designed for use with quick connect coupling part# 81441 Hose and coupling also available together as part# 80144. Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes. Weight: 2.9		$55.24 Qty
81809	brass fitting for converting side burners from natural gas to LP for some Kirkland Signature grills. Weight: 0.4	Click for photos	$13.53 Qty
82425	24” stainless steel spring hose protector for some Kirkland Signature grills. Weight: 0.5		$24.20 Qty
86328	male plug for LP quick connect fitting for some Kirkland Signature grills. Replaces 510 POL. Weight: 0.1		$9.21 Qty
IGEIB4-B	Battery powered push button igniter for some Kirkland Signature grills. Has four (4) spade type male connectors. Uses 1 AAA battery (not supplied) Requires 3/4” or 13/16” mounting hole. TEMPORARILY OUT OF STOCK. Orders for this part will be filled from new inventory arriving mid October. Weight: 0.3	Click for photos	$25.95 Qty

* Internet part orders over $25 shipped to the USA (contiguous 48 states only)

All trademarks property of their respective owners