Weber Genesis Silver C

Front or rear stainless steel burner for Weber model Genesis Silver C.

Part Number: 12811
Dimensions: 28” x 1”
Material: stainless steel
Weight: 1.3

Stainless steel burner kit. Includes:

• Two 28” tube burners for front and rear
• One 27 3/8” center tube burner
• One 12 3/4” stainless cross-over bar
• Spider exclusion screens on all burners

Part Number: 128B4
Dimensions: 28” x 12 3/4”
Material: stainless steel
Weight: 2.9

Center stainless steel burner for Weber model Genesis Silver C.

Part Number: 12911
Dimensions: 27 3/8” x 1”
Material: stainless steel
Weight: 1.2

Channel formed U-shapped porcelain steel cooking grids. Channel formed means rolled steel stamped into a U-shape; is not solid round rods. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 53812
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped porcelain steel
Weight: 6.0

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel. Channel steel is rolled steel stamped in a U-shape; is not solid round rods.

Part Number: 538S2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 6.0

Cast iron cooking grids (set of 2). Porcelain treated, flat matte finish.

Part Number: 69112
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 23 1/4”
Material: cast iron
Weight: 9.0

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 17 3/8”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 31 5/16”

Part Number: 53801-SS-X2
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 15.6

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• 5/16” solid rods
• Sold individually

Fits: Beaumark, Broil-Mate, Broil King, Centro, Charbroil, Charmglow, Costco, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, John Deere, Kalamazoo, Kenmore, Kmart, Martha Stewart, Master Chef, Members Mark, Nexgrill, Patio Chef, S.R.Potten, Sams, Savor Pro, Sonoma, Sure Heat, Thermos, Uniflame, Vermont Castings, Wal Mart, Walmart, Weber. May fit others.

Part Number: 53801-SS
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 7.8

Premium stainless steel cooking grids. Set of two (2). Channel formed, U-shaped. Fits Weber Genesis Silver B & C, Genesis Gold B & C, Genesis 1000 - 3500 and Spirit 700.

• 304 commercial grade stainless steel
• Channel formed is flat metal, rolled into a ”U”, or ”V” shape, not round rods
• Sold as a set of two.

Fits grills made by Weber. May fit others.

Part Number: 53812-SS
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 6.0

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 5/16”
• Side-to-Side: 11 11/16”

Total Side-to-Side: 23 3/8”

Part Number: 69112-UNI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 3/8”
Material: cast iron
Weight: 14.7

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69112-UNI-X2 for a set of two (2) grids.

Part Number: 69112-UNI
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 7.35

Stainless steel Flavorisor bars for Weber. Set of 5.

Part Number: 94101
Dimension Front-to-Back: 22 9/16”
Dimension Side-to-Side: 2 1/4”
Material: stainless steel
Weight: 7.0

Porcelain steel Flavorisor Bars set of five for Weber model Genesis Silver C.

Part Number: 95365
Dimension Front-to-Back: 22 9/16”
Dimension Side-to-Side: 2 1/4”
Material: porcelain steel
Weight: 8.4

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Snap-in piezo ignitor kit. Fits Weber Genesis Silver A and B 2002-2004, and Newer Spirit E310 & E320. Also fits many other Weber mododels that use a snap-in ignitor instead of a threaded part. Includes

• UP-9B Snap-in push-button piezo ignitor
• IG-13B Collector box, electrode, and 19 1/2” wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-10B
Weight: 0.5

Threaded piezo ignitor kit. Fits Genesis Silver B & C, Genesis 1000-5000, Spirit 700-900, and other Weber models that use a threaded ignitor instead of a snap-in. Includes:

• UP-7B Threaded push-button piezo ignitor with external grounding tab
• IG-13B Collector box, electrode, and wire assembly

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-11B
Weight: 0.5

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

Hardwood replacement handle for some Weber grills. Total length 24 7/8” x 1 9/16”. Has two 1” slotted mounting holes for ”wiggle room” with center to center about 23 1/8”. (Hardware not included.)

Part Number: WH-4B
Dimensions: 24 7/8
Material: wood
Weight: .60

Chrome steel warming rack for Weber model Genesis Silver C.

Part Number: 02345
Dimensions: 24 7/8” x 4 5/8”
Material: chrome steel wire
Weight: 1.8

Chrome steel warming rack. This part is 25 3/16” at is absolute longest. The rack itself is 24”.

Part Number: 02347
Dimensions: 25 3/16” x 3 11/16”
Material: chrome steel wire
Weight: 2.0

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

Deluxe 17” stainless steel turner.

• Soft comfort rubber grip
• Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3