Academy Sports BQ05046-6

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

Stainless steel cooking grids (set of 3) for Academy Sports model BQ05046-6.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).

Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 63012-UNI-X2 for a set of two (2).

Part Number: 63012-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 7.85

Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 1.35

SET OF THREE/3 PACK Stainless steel heat diffuser. On some grill models it is also known as a Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

Bottom heat shield, which measures 6 3/4” x 29 7/8”. When adding the attached support brackets, the 6 3/4” becomes 7 3/4”. Made in USA

Part Number: CLA-MS0169
Dimensions: 7 3/4” x 29 7/8”
Material: stainless steel
Weight: 2.0

Stainless steel grease tray. The tray measures 26 1/2” x 15 1/8” and the handle is 31 11/16” x 2”. Unassembled; includes bolts & lock nuts. Made in USA

Part Number: CLA-DS0168
Dimensions: 26 1/2” x 15 1/8”
Material: stainless steel
Weight: 6.0

Premium grade stainless steel alternative warming rack for delicate foods like vegetabes and seafood.
Made in USA

Part Number: CLA-WS0165
Dimensions: 7 1/16” x 30 1/4”
Material: stainless steel
Weight: 2.35

#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

• Drawer with handle
• Drawer cover
• Mounting hardware and instructions
• Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2