Every Burner Brackets and Carryover we have

Burner support rail (bracket). Made in USA

Part Number: CLA-MS0173
Dimensions: 27 13/16” x 5 1/8”
Material: stainless steel
Weight: 1.2

Burner support rail (bracket) with crossover tube. Made in USA .

Part Number: CLA-MS0176
Dimensions: 15 1/16”
Material: stainless steel
Weight: 0.70

Stainless steel burner mounting bracket with integrated gas carryover tubes. Please remove your old bracket and compare these details. Also review CLA-MS0092 to confirm the correct bracket for your grill.

• Cross over tubes measure 5 3/4”
• Mounting holes are oblong and about 7 1/2” apart, center to center
• Back mounting side ”flips” down
• When installed, cross over tubes are on top

Made in USA

Part Number: CLA-MS0180
Dimensions: 17 3/8
Material: stainless steel
Weight: 0.90

Stainless steel burner support bracket. Made in the USA.
Made in USA

Part Number: CLA-MS0212
Dimensions: 3” x 21 3/16”
Material: stainless steel
Weight: .9

CLA-MS0223 consists of two pieces referred to as A & B. The A is the front bracket and should be installed into the front of the grill; the B is the back bracket and should be installed into the back of the grill. These two parts are made to reinforce the grill wall holding the burners and flame tamers to extend the life of the grill. Instructions included. It will be necessary to purchase new electrodes, part# 03118. Made in USA

Part Number: CLA-MS0223
Dimensions: 20”
Material: stainless steel
Weight: 1.40

Stainless steel burner support bracket and crossover. Made in USA .

Part Number: CLA-MS0224
Dimensions: 2 3/8” x 16 11/16”
Material: stainless steel
Weight: 0.55

Stainless steel burner support/cross over tube. Made in USA . Replaces OEM # P02203102B.

Part Number: CLA-MS0237
Dimensions: 2 1/4” x 23 7/8”
Material: stainless steel
Weight: .85

Stainless steel support bracket for heat plates and burners. Made in USA

Part Number: CLA-MS0240
Dimensions: 1 7/8” x 4 5/16”
Material: stainless steel
Weight: 0.2

Burner support and carry-over bracket. Made in USA .

Part Number: CLA-MS0261
Dimensions: 22 1/16”
Material: stainless steel
Weight: 0.70

4-Burner support and carry-over bracket. Made in USA .

Part Number: CLA-MS0265
Dimensions: 26”
Material: stainless steel
Weight: 0.75

Stainless steel burner support and carryover bracket. Replacement for OEM # P02204161B and # P2230A. Made in USA

Part Number: CLA-MS0266
Dimensions: 24 1/16
Material: stainless steel
Weight: .65

Stainless steel burner crossover bracket. Replaces OEM # P02204261B. Made in USA

Part Number: CLA-MS0287
Dimensions: 1 1/4” x 27 15/16”
Material: stainless steel
Weight: 0.95

Burner support and cross-over bracket. Made in USA

Part Number: CLA-MS0289
Dimensions: 9 7/8
Material: stainless steel
Weight: .75

Stainless steel burner support bracket. Replaces OEM # P02206271B. Made in USA

Part Number: CLA-MS0292
Dimensions: 1 5/16” x 38 7/8”
Material: stainless steel
Weight: 2.0

Stainless steel burner support bracket. Replaces OEM # P2218B. Made in USA

Part Number: CLA-MS0293
Dimensions: 1 3/8” x 23 13/16”
Material: stainless steel
Weight: 0.75

SET OF 2 stainless steel rear burner bracket. Made in USA

Part Number: CLA-MS0296
Dimensions: 11 1/4
Material: stainless steel
Weight: 0.25

Stainless steel burner support and carryover bracket; replaces OEM # SP53A-20 used in burner assembly # SP114-12. Made in USA

Part Number: CLA-MS0299
Dimensions: 27 1/8
Material: stainless steel
Weight: .5

Stainless steel burner brace with carryover tubes. This part functions as a burner support bracket with integated gas carryover tubes.

• All stainless steel construction
• Fits 4-burner Terrace and Designer Series grill models
• Replaces OEM part numbers 80003053 and 80000689

Made in USA

Part Number: CLA-MS0302
Dimensions: 1 5/16” x 32 3/16”
Material: Stainless Steel
Weight: 1.3

Stainless steel burner cross-over 5 7/8” x 2 1/8”. Replaces OEM # 600-9620-7. Sold individually, number required varies by grill. Made in USA

Part Number: CLA-MS0339
Material: stainless steel
Weight: 0.20

Main burner support bar bracket and gas carryover tubes. Made in USA . A universal bracket designed by Charbroil to replace a number of burner suppport brackets that are no longer available. Adjustable mounting hardware allows part to fit different width Charbroil-made grills.

• Instructions and bracket assembly hardware included
• Mounting screws for attaching to grill not supplied.
• Adjustable form 25” to 27 1/2”.

Replaces part numbers 80012481, 80002930, 80002950, 80000683 and G40803000000

Part Number: CLA-MX0034
Dimensions: 27 1/2
Material: carbon steel
Weight: 1.1

Main burner support bracket. Replaces Brinkmann OEM part# 600-6431-B. Made in USA .

Part Number: CLA-MX0046
Dimensions: 24 5/16
Material: stainless steel
Weight: 0.8

Main burner support bar bracket. Made in USA .

Part Number: CLA-MX0047
Dimensions: 25 1/4
Material: carbon steel
Weight: 1.2

Main burner support bar bracket. Made in USA .

Part Number: CLA-MX0048
Dimensions: 24 1/16
Material: carbon steel
Weight: 1.2

Main burner support bar bracket. Made in USA .

Part Number: CLA-MX0049
Dimensions: 34
Material: carbon steel
Weight: 1.1

Main burner support bar bracket. Made in USA .

Part Number: CLA-MX0050
Dimensions: 23 15/16
Material: carbon steel
Weight: 1.2

Universal stainless steel replacement burner mounting bracket w/crossovers (sometimes called a burner rail). Fits Charbroil-made grills with certain cast iron burners. Adjustable from 25” to 27 1/2”.
Replaces the following OEM part numbers:

• 80000652
• 80000683
• 80001210
• 80001440
• 80002834
• 80002950

Fits most grills using our burners CIDCH, CIT & CICH.

Part Number: P2238B-R
Material: stainless steel
Weight: 1.20

BURNER CROSS OVER BRACE FG650

Part Number: SP182-6
Material: carryover tube
Weight: 1.0

CROSSOVER TUBE BURNER EURO 500

Part Number: SP211-6
Material: carryover tube
Weight: 1.0

TUBE SPACER CROSS LIGHTER *

Part Number: SP5000-40
Weight: 1.0