Home > American Outdoor Grill (AOG) Grill Models > American Outdoor Grill (AOG) 24NPAOG 24" 2-Burner Natural Gas Grill On SS Patio Post
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your American Outdoor Grill (AOG) grill.
Part diagrams and owners manuals for American Outdoor Grill (AOG) model: 24NP
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit American Outdoor Grill (AOG) model: 24NP
24NP Burners
24-B-06-R-X2 Stainless steel Main Burners. SET OF TWO (2). Fits AOG 24”, 30”, and 36” grill models.
NOTE: This aftermarket burner replaces original AOG burner part# 24-B-06.
Part Number: AOG2-24-B-06-R-X2
Dimensions: 14 1/2” x 6 15/16”
Material: stainless steel
Weight: 2.0
$200.86
24-B-06-R Stainless steel Main Burner. Fits AOG 24”, 30”, and 36” grill models.
See part 24-B-06-R-X2 and 24-B-06-R-X3 for two and three burner sets.
NOTE: This aftermarket burner replaces original AOG burner part# 24-B-06.
Part Number: AOG2-24-B-06-R
Dimensions: 14 1/2” x 6 15/16”
Material: stainless steel
Weight: 1.0
$102.76
24NP Vaporizer Panel
24-B-05-R-X2 Vaporizer Panels. SET OF TWO (2). Fits AOG 24” grill models.
- Made in USA
- Commercial grade 304 stainless steel
- Set of two panels
- 24” models require two (2) panels
NOTE: This aftermarket Vaporizer Panel replaces orignal AOG part# 24-B-05.
Part Number: AOG1-24-B-05-R-X2
Dimension Front-to-Back: 15 7/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 4.24
$130.93
24-B-05-R Vaporizer Panel. Fits AOG 24” grill models.
- Made in USA
- Commercial grade 304 stainless steel
- Sold individually
- 24” models require two (2) panels
NOTE: This aftermarket Vaporizer Panel replaces orignal AOG part# 24-B-05.
See part 24-B-05-R-X2 for a 2 panel set.
Part Number: AOG1-24-B-05-R
Dimension Front-to-Back: 15 7/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 2.12
$72.83
24NP Igniter Components
3199-48-R Electronic Ignitor (4 Spark). Requires AAA battery (not included).
NOTE: This aftermarket Ignitor replaces original AOG part# 3199-48.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: AOG2-3199-48-R
Weight: 0.3
$31.52
24NP Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
24NP Valves, Orifices, and Manifolds
gas valve for use with natural or LP gas, 8mm diameter shaft, 12 o’ clock off position, shipped without orifice for American Outdoor Grill (AOG) model 24NP.
Part Number: 35010
Dimensions: 2 1/16” x 1 1/4”
Weight: 0.5
$35.18
24NP Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59