Home > Broil King Grill Models > Broil King 9020-57NZ
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement grill parts for Broil King model: 9020-57NZ
9020-57NZ Burners
Genuine OEM Broil King stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
9020-57NZ Cooking Grids
Genuine OEM Broil King cast iron
cooking grid 330/440/550 Grid measures 17.48” x 6 for Broil King model 9020-57NZ.17”.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
Part Number: 52005-281
Dimension Front-to-Back: 17 7/16”
Dimension Side-to-Side: 6 3/16”
Material: cast iron
Weight: 5.5
$39.97
9020-57NZ FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave for Broil King model 9020-57NZ.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
9020-57NZ Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Broil King electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
9020-57NZ Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Genuine OEM Broil King Porcelain Grease Pan for Broil King model 9020-57NZ.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
9020-57NZ Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
DOOR HANDLE RESIN * for Broil King model 9020-57NZ.
Part Number: 21475-138
Weight: 1.0
$6.73
9020-57NZ Wheels and Castors
Genuine OEM Broil King 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.
Part Number: 10892-7G
Weight: .45
$13.19
CASTER BRACKET 440 BLK RESIN for Broil King model 9020-57NZ.
Part Number: 51339-401
Weight: 0.1
$2.83
Rubber castor, 3” w/plate, locking for Broil King model 9020-57NZ.
Part Number: 10892-23
Weight: 0.66
$6.87
9020-57NZ Warming Racks
WARMING RACK 440 PORC (back support rod 25 5/8” and front support rod 26 3/16” warming rack 7 3/8” x 25”) for Broil King model 9020-57NZ.
Part Number: 52005-991
Dimensions: 25 5/8
Weight: 3.3
$35.16
9020-57NZ Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9020-57NZ Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9020-57NZ.
Part Number: S21233
Weight: 0.01
$1.08
Washer for Broil King model 9020-57NZ.
Part Number: S21255
Weight: 0.01
$1.08
9020-57NZ Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96