Model: 9570-77

Genuine OEM Broil King stainless steel Dual-Tube burner. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.

Note: The adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.

This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.

Part Number: 22909-104
Material: Stainless steel
Weight: 1.0
Dimensions: 17 1/8” x 1 1/4”

Genuine OEM Broil King stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Material: Stainless steel
Weight: 1.15
Dimensions:

• Front-To-Back: 17 1/2″
• Side-To_Side: 5 7/8″

Genuine OEM Broil King electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:

• Front-To-Back: 6 1/2″
• Side-To_Side: 6″

CONTROL KNOB SML I CLEAR for Broil King model 9570-77.

Part Number: 22001-669
Weight: 0.1

BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9570-77.

Part Number: 22001-164
Weight: 0.1

LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.

Part Number: 24005-12A
Weight: .85
Dimensions: 25

Genuine OEM Broil King NG gas hose for Broil King model 9570-77.

Part Number: 10111-K45
Weight: 2.1

Genuine OEM Broil King warming rack. Porcelain enameled, glossy finish.

Part Number: 22005-991
Material: Porcelain steel
Weight: 3.10
Dimensions:

• Front-To-Back: 26 1/8″
• Side-To_Side: 8 5/8″

WARMING RACK (SMALLER SIDE) PORCELAIN STEEL for Broil King model 9570-77.

Part Number: 22003-991
Weight: 1.65
Dimensions:

• Front-To-Back: 8 5/8″
• Side-To_Side: 12 1/2″

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

TUBE-REAR BURNER-COMPR.FITTING -- ASSY

Part Number: 20809-957
Weight: .15
Dimensions: 22”

Hinge pin clip for Broil King model 9570-77.

Part Number: S21233
Weight: 0.01

REAR BURNER SPRING for Broil King model 9570-77.

Part Number: S21362
Weight: 1.0

OVEN LIGHT * for Broil King model 9570-77.

Part Number: 25020-71
Weight: 1.0

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9570-77.

Part Number: Y-12835
Weight: 1.0

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Weight: 0.2
Dimensions: 13

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Material: stainless steel
Weight: 1.6
Dimensions: 12 3/4” x 12 3/4”

Extra Wide Nylon Grill Brush

Brush anywhere on the grill, deep into the corners, between the grids, and in broad strokes along the surface. The triangular shaped head of this brush is ideal for cleaning anywhere. 17 in. overall length with a 6. in. wide head. Nylon bristles, wire shaft and resin handle.

*For use on a cool grill.

Part Number: 77643
Weight: 0.5