Home > Broil King Grill Models > Broil King 9580-84AU
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Broil King grill. This is best done with the old parts out of the grill. Verify your Broil King grill model number.
Replacement gas grill parts for Broil King model: 9580-84AU
9580-84AU Burners
Genuine OEM Broil King stainless steel Dual-Tube burner. This part has been slightly changed by the manufacturer to include a small bend at the end that does not affect the fit on existing grills that use this part.
Note: The
adjustable air shutter on this burner should be set to 1/3 open for LP grills, 2/3 open for natural gas grills. The burner ships with the air shutter set 1/3 open for LP grills.
This burner is the same part as 22909-104NG and 22909-104LP. There is no difference in the parts, 22909-104NG has the air shutter set to 2/3 open for natural gas, 22909-104LP has the air shutter set to 1/3 open for LP.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 22909-104
Material: Stainless steel
Weight: 1.0
Dimensions: 17 1/8 x 1 1/4
9580-84AU Igniter Components
Genuine OEM Broil King electrode with 14 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
9580-84AU Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:
- Front-To-Back: 6 1/2″
- Side-To_Side: 6″
9580-84AU Knobs and Handles
CONTROL KNOB SML I CLEAR for Broil King model 9580-84AU.
Part Number: 22001-669
Weight: 0.1
Image not available
BEZEL SS FLAT SML 250/500/625/750 A for Broil King model 9580-84AU.
Part Number: 22001-164
Weight: 0.1
Image not available
LID HANDLE 625 430SS * for Broil King model 9580-84AU.
Part Number: 24006-239
Weight: 1.0
Image not available
HANDLE END CAP CHROME * for Broil King model 9580-84AU.
Part Number: 26009-917
Weight: 1.0
HANDLE WEDGE BLK for Broil King model 9580-84AU.
Part Number: 24009-938
Weight: 1.0
Image not available
9580-84AU Warming Racks
Genuine OEM Broil King porcelain coated warming rack for Broil King model 9580-84AU.
Part Number: 22006-991
Material: porcelain steel
Weight: 6.0
Dimensions:
- Front-To-Back: 32 5/8″
- Side-To_Side: 8 1/2″
9580-84AU Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8 wide and 2 high. The threaded stem is about 5 /16 diameter and 1 1/8 long.
Part Number: 10571-6
Weight: 0.12
9580-84AU Miscellaneous Repair Parts
Cotter pin for Broil King model 9580-84AU.
Part Number: Y-11230
Weight: 0.01
Hinge pin clip for Broil King model 9580-84AU.
Part Number: S21233
Weight: 0.01
OVEN LIGHT * for Broil King model 9580-84AU.
Part Number: 25020-71
Weight: 1.0
Image not available
9580-84AU Side Burners
Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.
Part Number: 23000-253
Material: stainless steel
Weight: 1.6
Dimensions: 14 1/4 x 11 3/16
Image not available
9580-84AU Accessories
Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.
Part Number: 00281
Weight: .45
Dimensions: 11 7/8
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2 x 10
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Broil King model 9580-84AU. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. Oct 15 2025
|
We ship BBQ grill parts for Broil King gas grills worldwide
Back to Broil King grill parts