Model: 9580-86CH

Rear burner tubular with deflector; includes collector box, electrode and connector wire for Broil King model 9580-86CH.

Part Number: 27906-354
Weight: 1.0
Dimensions: 32

Genuine OEM Broil King stainless steel Flav-R-Wave heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.

Part Number: 22209-904
Material: Stainless steel
Weight: 1.15
Dimensions:

• Front-To-Back: 17 1/2″
• Side-To_Side: 5 7/8″

Genuine OEM Broil King electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY

Part Number: 27249-904
Material: stainless steel
Weight: .35
Dimensions:

• Front-To-Back: 6 1/2″
• Side-To_Side: 6″

CONTROL KNOB SML I CLEAR for Broil King model 9580-86CH.

Part Number: 22001-669
Weight: 0.1

BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9580-86CH.

Part Number: 22001-164
Weight: 0.1

LID HANDLE 625 430SS * for Broil King model 9580-86CH.

Part Number: 24006-239
Weight: 1.0

HANDLE END CAP CHROME * for Broil King model 9580-86CH.

Part Number: 26009-917
Weight: 1.0

HANDLE WEDGE BLK for Broil King model 9580-86CH.

Part Number: 24009-938
Weight: 1.0

Genuine OEM Broil King porcelain coated warming rack for Broil King model 9580-86CH.

Part Number: 22006-991
Material: porcelain steel
Weight: 6.0
Dimensions:

• Front-To-Back: 32 5/8″
• Side-To_Side: 8 1/2″

Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Cotter pin for Broil King model 9580-86CH.

Part Number: Y-11230
Weight: 0.01

TUBE-REAR BURNER-COMPR.FITTING -- ASSY

Part Number: 20809-957
Weight: .15
Dimensions: 22”

Hinge pin clip for Broil King model 9580-86CH.

Part Number: S21233
Weight: 0.01

REAR BURNER SPRING for Broil King model 9580-86CH.

Part Number: S21362
Weight: 1.0

OVEN LIGHT * for Broil King model 9580-86CH.

Part Number: 25020-71
Weight: 1.0

SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9580-86CH.

Part Number: Y-12835
Weight: 1.0

Side burner lid IR stainless steel. Sometimes shipped with vinyl peel-off coating; remove before use.

Part Number: 23000-253
Material: stainless steel
Weight: 1.6
Dimensions: 14 1/4” x 11 3/16”

Bamboo Appetizer 7” Skewers - pack of eight. Limited to supplies on hand.

Part Number: 11040
Weight: 0.4
Dimensions: 7

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Material: stainless steel
Weight: 0.5
Dimensions: 8 1/4

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2” x 16”

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2