Home > Broil King Grill Models > Broil King 9960-76EU
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil King grill.
Replacement BBQ grill parts for Broil King model: 9960-76EU
9960-76EU FLAV-R-WAVE
Genuine OEM Broil King stainless steel Flav-R-Wave
heat plate / Vaporizer. The manufacturer has redesigned this Flav-R-Wave. It is still the functional OEM replacement part, and it is sometimes marketed as part number 18433.
Part Number: 22209-904
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 5 7/8”
Material: Stainless steel
Weight: 1.15
$21.48
9960-76EU Igniter Components
Genuine OEM Broil King electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
9960-76EU Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
9960-76EU Knobs and Handles
CONTROL KNOB SML I CLEAR for Broil King model 9960-76EU.
Part Number: 22001-669
Weight: 0.1
Image not available
$5.15
BEZEL SS FLAT SML ”250/500/625/750 ”A”” for Broil King model 9960-76EU.
Part Number: 22001-164
Weight: 0.1
Image not available
$2.83
LID HANDLE-STRAIGHT 500 430SS* for Broil King model 9960-76EU.
Part Number: 24005-239
Weight: 1.0
Image not available
$13.98
HANDLE END CAP CHROME * for Broil King model 9960-76EU.
Part Number: 26009-917
Weight: 1.0
$19.10
HANDLE WEDGE BLK for Broil King model 9960-76EU.
Part Number: 24009-938
Weight: 1.0
Image not available
$1.95
9960-76EU Warming Racks
Genuine OEM Broil King warming rack.
Porcelain enameled, glossy finish.
Part Number: 22005-991
Dimensions: 26 1/8” x 8 5/8”
Material: Porcelain steel
Weight: 3.10
$41.14
9960-76EU Heat indicators and Meat Thermometers
Genuine OEM Broil King Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
9960-76EU Miscellaneous Repair Parts
Hinge pin clip for Broil King model 9960-76EU.
Part Number: S21233
Weight: 0.01
$1.08
REAR BURNER SPRING for Broil King model 9960-76EU.
Part Number: S21362
Weight: 1.0
$1.08
OVEN LIGHT * for Broil King model 9960-76EU.
Part Number: 25020-71
Weight: 1.0
Image not available
$14.27
9960-76EU Hardware
SCREW-PHCP 6-32X1/4 TY-F JS500 for Broil King model 9960-76EU.
Part Number: Y-12835
Weight: 1.0
Image not available
$0.70
9960-76EU Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31
USA shipping (contiguous 48 states only) on all Broil King part orders $49 and more