Regulators and Hoses for Broil-Mate grills

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Broil-Mate grill.

Broil-Mate Regulators and Hoses

LP regulator with QCC-1 connection for some Broil-Mate grills. Has a 3/8” female NPT pipe thread that is 19/32” inside diameter of the female threads.

Part Number: 00920
Weight: 0.5

$23.33






1/4” LP hose, 36” length with 1/4” male pipe thread (MPT) on one end, 3/8” swivel female flare fitting on the other end for some Broil-Mate grills. Included is a 3/8” male pipe thread bushing, not shown in photo.

Part Number: 01110
Weight: 0.6

$19.78






Genuine OEM Broil-Mate Gas train - rear burner for some Broil-Mate grills.

Part Number: 20805-457
Weight: 0.3

$23.16



Part# 20805-457 fits these 3 Broil-Mate models:




48” Propane adaptor hose for some Broil-Mate grills.
  • 48” portable propane adaptor hose
  • Can be used to connect table top grills, camping stoves, and other appliances designed to use disposable LP bottles to standard 20lb LP tanks.
  • For use with tank valves featuring QCC1 connection


Part Number: 80004
Weight: 0.8
Dimensions: 50 1/4” x 0 1/2”

$40.30






24” LP hose and regulator with QCC-1 connection for some Broil-Mate grills.
  • For use on ”new style” QCC-1 tanks.
  • Consists of hose part# 01000 and regulator part# 00920.
  • Hose end with SAE 3/8” female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80012
Weight: 0.80

$24.90






LP regulator with QCC-1 connection and two 23” hoses for some side burner applications for some Broil-Mate grills. (If you need two hoses, one shorter than the other, see part # 80035.)
  • For use on ”new style” QCC-1 tanks.
  • Total length is 47”
  • Both hose ends are SAE 3/8” female flare fittings.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Part Number: 80034
Weight: 1.2

$28.17






LP regulator with 28" and 12" hoses for some Broil-Mate grills. Fits some grills with side burners based on the needed lengths of the hoses. Check your old part.

Part Number: 80035
Weight: 2.4

$46.55






12 foot natural gas hose with brass quick-connect coupling for some Broil-Mate grills.
  • Consists of hose part# 81442 and coupling part# 81441.
  • The hose end with SAE 3/8” female flare fitting connects to grill.
  • The other hose end, the quick-connect end (with coupler attached), has a 3/8” female pipe thread and connects to the gas supply.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8” (the inside hose diameter is 3/8”). See our flare fitting description for information on measuring and sizes.

Part Number: 80144
Weight: 3.7

$79.46






Super heavy duty Sturgis 12' natural gas hose with 1/2” model 4 brass quick-connect coupling for some Broil-Mate grills. Includes Couple-Safe Technology Thermal Shut-Off Device Protection. For grills over 70,000 BTU.
  • Consists of 1/2” ID hose and coupling (part# 81451).
  • The hose end with SAE 1/2” female flare fitting connects to grill.
  • The other hose end, the quick-connect end (with coupler attached), has a 1/2” female pipe thread and connects to the gas supply.
Note: The grill must have a matching SAE 1/2” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 1/2” fitting is much larger, approximately 3/4”. See our flare fitting description for information on measuring and sizes.

Part Number: 80145
Weight: 3.9

$124.24






Brass 3/8” natural gas quick connect coupling for some Broil-Mate grills.
  • Use with hose #81442.
  • Coupling and hose also available together as part# 80144.

      See description of part# 80144 for more information and pictures of how part couples with hose.


    Part Number: 81441
    Material: brass
    Weight: 0.4
    Dimensions: 2 1/2” x 1 1/8”

$37.14






12 foot natural gas quick-connect hose for some Broil-Mate grills.
  • The hose end with SAE 3/8” female flare fitting connects to grill.
  • Designed for use with quick connect coupling part# 81441
  • Hose and coupling also available together as part# 80144.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. (Inside diameter of hose is 3/8” and the outside is about 5/8”.) See our flare fitting description for information on measuring and sizes.

Part Number: 81442
Weight: 2.3

$48.62






Brass 1/2” natural gas quick connect coupling for some Broil-Mate grills. Included in hose and coupling assembly part 80145.

Part Number: 81451
Material: brass
Weight: 0.7
Dimensions: 4” x 1 5/8”

$52.72






QCC-1 type 1 appliance end fitting for some Broil-Mate grills. Replaces POL. It has a 1/4” male NPT thread to attach to the old regulator.

Part Number: 86495
Weight: 0.3

$16.47






Five piece 3/8” natural gas quick disconnect set includes:
  • Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
  • Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
  • Hansen & Sturgis dust cover
  • plastic dust plug
  • Plastic 3/8 MPT Snap Tite
  • Suitable up to approximately 60,000 BTU for some Broil-Mate grills.


Part Number: ASCPL-1
Weight: 3.0

$79.46



Part# ASCPL-1 fits these 199 Broil-Mate models:




Universal LP regulator for tabletop grills for some Broil-Mate grills. Includes orifice.

Part Number: CLA-VL0254
Material: aluminum/brass
Weight: 0.40

$37.30






Straight thru L for some Broil-Mate grills.P regulator with 28” hose. Adequate to 90,000 BTU.

Part Number: HR-6B
Weight: 1.50

$38.35



Part# HR-6B fits these 2 Broil-Mate models:




Universal table top regulator for disposable LP bottles for some Broil-Mate grills. Uses 1/8” male MPT orifice, not included.
  • CGA-600 inlet
  • 1/4” FNPT outlet
  • Includes1/4” MNPT x 1/8” FNPT bushing
  • Can use old 1/8” male MPT orifice.
Will accept many old orifices. FNPT is Female National Pipe Thread.

Part Number: R6000
Weight: 0.5

$19.86






RONHK-R 24” LP hose and LP regulator with QCC-1 connection for some Broil-Mate grills.

  • For use on ”new style” QCC-1 tanks.
  • Consists of hose part# 01000 and regulator part# 00920.
  • Hose end with SAE 3/8” female flare fitting connects to grill.
Replaces OEM part RONHK.

Part Number: RONHK-R
Weight: 0.80
Dimensions: 23 1/2” x 0 1/2”
Image not available

$24.90






HOSE CONNECTOR BARB for some Broil-Mate grills.

Part Number: S13297
Weight: 1.0

$3.18



Part# S13297 fits these 23 Broil-Mate models:




HOSE CONNECTOR NUT 3/8 for some Broil-Mate grills.

Part Number: S13299
Weight: 1.0
Image not available

$2.30



Part# S13299 fits these 23 Broil-Mate models:




HOSE SIDE BURNER W/ for some Broil-Mate grills.066 ORIFICE. This part is no longer available, per the manufacturer for safety reasons. Must purchase entire valve and manifold assembly. You can contact the manufacturer directly or email us for more information.

Part Number: S13467-066
Weight: 1.0
Image not available

$


Part# S13467-066 fits these 11 Broil-Mate models:




HOSE SIDE BRNR W/ for some Broil-Mate grills.079 ORIFICE

Part Number: S13467-079
Weight: 1.0
Image not available

$24.42



Part# S13467-079 fits these 11 Broil-Mate models:




NG side burner hose no longer available separately for some Broil-Mate grills.
Now sold only as entire valve assembly. Please verify your model number per the certification tag on your gas grill.

Part Number: S13467-132
Weight: 2.8
Image not available

$24.42



Part# S13467-132 fits these 49 Broil-Mate models:


We can ship parts for Broil-Mate gas BBQ grills worldwide



Back to Broil-Mate grill parts


GRILLING  ACCESSORIES

Orders for Broil-Mate replacement grill parts $79 and over get Free USA shipping (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy