Home > Home Depot Grill Models > Home Depot 720-0896E
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Home Depot grill.
Replacement BBQ grill parts for Home Depot model: 720-0896E
720-0896E Burners
stainless steel burner for Home Depot model 720-0896E.
Part Number: 14781
Dimensions: 15 x 0 5/8
Material: stainless steel
Weight: 0.4
$28.91
720-0896E Cooking Grids
matte finish cast iron
cooking grid for Home Depot model 720-0896E.
Part Number: 66173
Dimension Front-to-Back: 17 1/16
Dimension Side-to-Side: 33 3/16
Material: matte cast iron
Weight: 15.3
$123.82
720-0896E Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 97371
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 0.55
$21.54
SET OF THREE/3 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.16
$48.77
SET OF FOUR/4 PACK Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 2.88
$62.52
Stainless steel
heat plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a height that is 3/16 taller than 97371. Determine if this matters to you and order the part that best replaces your old
heat plate.
Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: stainless steel
Weight: 0.72
$17.61
Porcelain steel Flame Tamers. SET OF SIX.
Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16
Dimension Side-to-Side: 3 1/4
Material: porcelain steel
Weight: 3.3
Image not available
$105.36
720-0896E Igniter Components
electrode with female spade connection and 45 ins. wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 01473
Dimensions: 3 3/4 x 1
Weight: 0.1
$12.00
Battery powered 7-outlets push button ignitor. Uses AA battery and requires a 7/8 mounting hole.
WARNING: Before ordering this 7-outlet ignitor, please inspect the spacing inside your grill for this part. The original ignitor was 2 1/2 x 2 5/8. The new version is longer 3 1/8 x 2 and it has two humps on each end. The original only had one hump. Please determine that the larger version will fit into your grill.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03377
Weight: 0.5
$38.00
720-0896E Heat indicators and Meat Thermometers
Heat indicator with a single probe and requires a 5/16 mounting hole. Note, the back side DOES NOT have an alignment pin.
Part Number: 00021
Dimensions: 3 5/8 x 1 3/4
Weight: 0.2
$15.90
720-0896E Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60