Home > Jenn-Air Grill Models > Jenn-Air 720-0150-LPJenn-Air 5-burner LP gas grill, Lowe's item# 168918
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Jenn-Air grill.
Part diagrams and owners manuals for Jenn-Air model: 720-0150-LP
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the Jenn-Air 720-0150-LP
720-0150-LP Burners
Cast iron burner for Jenn-Air model 720-0150-LP.
Part Number: 23301
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 3.9
$35.76
Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.
NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.
Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2
$90.92
720-0150-LP Flame Tamers
Stainless steel Flame Tamer/
heat plate.
This
heat plate also provides an economical alternative to some other
heat plates with the same front-to-back dimension.
- Sold individually, number required varies.
- Shipped with protective peel-off coating, remove before use.
- Made in USA .
Part Number: CLA-TS0020
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.80
$35.04
Stainless steel Flame Tamer for Jenn-Air model 720-0150-LP.
Part Number: NGCHP2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 0.7
$35.04
SET OF THREE/3 PACK Stainless steel Flame Tamer/
heat plate.
This
heat plate also provides an economical alternative to some other
heat plates with the same front-to-back dimension.
- Sold individually, number required varies.
- Shipped with protective peel-off coating, remove before use.
- Made in USA .
Part Number: CLA-TS0020-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 2.4
$91.40
SET OF FOUR/4 PACK Stainless steel Flame Tamer/
heat plate.
This
heat plate also provides an economical alternative to some other
heat plates with the same front-to-back dimension.
- Sold individually, number required varies.
- Shipped with protective peel-off coating, remove before use.
- Made in USA .
Part Number: CLA-TS0020-X4
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 6 3/8”
Material: stainless steel
Weight: 3.2
$114.21
720-0150-LP Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96