Heat Plates for Kirkland Signature grills

Stainless steel Flame Tamer for some Kirkland Signature grills. Sold individually.

Part Number: 91931
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 3.0

Universal adjustable stainless steel heat plate/Flame Tamer for some Kirkland Signature grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Kirkland Signature grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Stainless steel Heat Tent/ Flame Tamer for some Kirkland Signature grills. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

Stainless steel Flame Tamer for some Kirkland Signature grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0019
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 6 15/16”
Material: stainless steel
Weight: 1.2

SET OF THREE/3 PACK Stainless steel Flame Tamers for some Kirkland Signature grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0019-X3
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 6 15/16”
Material: stainless steel
Weight: 3.6

Stainless steel heat plate (radiant) for some Kirkland Signature grills.. Replaces OEM part# 30923. Sold individually. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0043
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 11 3/8”
Material: stainless steel
Weight: 2.3

Stainless steel Flame Tamer for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0083
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.9

Stainless steel Heat Distribution Plate for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 0.54

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Stainless steel Flame Tamer for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0163
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 8 1/4”
Material: stainless steel
Weight: 1.2

SET OF THREE/3 PACK Stainless steel Flame Tamer for some Kirkland Signature grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0163-X3
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 8 1/4”
Material: stainless steel
Weight: 3.6

Stainless steel Flame Tamer for some Kirkland Signature grills..

Part Number: NGSHP3
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 8 1/4”
Material: stainless steel
Weight: 1.3