Igniter Components for Napoleon grills

Shopping cart
replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.Shopping cart
 

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Napoleon grill.

Napoleon Igniter Components

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Napoleon grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03197
Weight: 0.05

$4.65

Qty
 




Universal 2 5/8” adapter wire with female round and male spade connectors for some Napoleon grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
  • Can change male round to male spade
  • Can change female spade to female round
ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03198
Weight: 0.05

$5.35

Qty
 




Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Napoleon grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03199C
Weight: 0.05

$4.37

Qty
 




Universal battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has one (1) terminal (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03310
Weight: 0.3

$16.95

Qty
 




Universal volt battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03320
Weight: 0.3

$27.78

Qty
 




Universal battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has three (3) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03330
Weight: 0.5

$18.48

Qty
 




Universal three-outlet battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has three (3) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

$33.89

Qty
 




Universal battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has (5) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

$19.43

Qty
 




Universal four-outlet battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has four (4) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03340
Weight: 0.5

$31.50

Qty
 




Universal battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03350
Weight: 0.7

$31.96

Qty
 




Universal battery powered push button ignitor for some Napoleon grills.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$38.00

Qty
 




Ignition connection wire used to connect battery powered spark generators to electrodes for some Napoleon grills. One 47” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.67

Qty
 
 
Part# 03610 fits these 17 Napoleon models:




14” ground wire with female spade connector and eye connectors for some Napoleon grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.58

Qty
 
 
Part# 03620 fits these 17 Napoleon models:




Universal adapter wire with male round and female spade connectors for some Napoleon grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03751
Weight: 0.05

$3.84

Qty
 




Universal collector box with electrode and wire for some Napoleon grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.


TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Feb 2024.

Part Number: IG-15B
Weight: 0.3

$13.71

Qty
 




Universal 3 outlet rotary spark generator for some Napoleon grills. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-8B
Weight: 0.3

$21.96

Qty
 


We can ship parts for Napoleon gas BBQ grills worldwide



Back to Napoleon grill parts




USA shipping for orders of gas grill parts of $49 or more for Napoleon gas BBQ grills (contiguous 48 states only)

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, March 3, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy