Heat indicators and Meat Thermometers for Tera Gear grills

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut for some Tera Gear grills.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Round heat indicator for some Tera Gear grills.

• Single 1 5/8” probe
• 2 1/8” diameter
• Requires 1/4” mounting hole

Part Number: 00015
Weight: 0.10

Round heat indicator for some Tera Gear grills.

• Single probe
• 3” diameter
• Requires 3/8” mounting hole

Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2

Round heat indicator for some Tera Gear grills.

• Single probe
• 1 13/16” diameter
• Requires 3/8” mounting hole

Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

Heat indicator with a single probe and requires a 5/16” mounting hole for some Tera Gear grills. Note, the back side DOES NOT have an alignment pin.

Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2

heat indicator for some Tera Gear grills.

Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2

Oval lid heat indicator for some Tera Gear grills. Mounts to grill with single 1.25” long threaded temperature probe in center.

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

Universal four piece mini thermometer set for some Tera Gear grills. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

Deluxe lid mounted heat indicator with chrome trim for some Tera Gear grills. Requires three holes, two mounting holes plus center hole. Indicator is about 2 11/16” wide and 2 5/16” tall. Mounting bolts are 1 1/2” on center.

Part Number: 21217
Dimensions: 2 11/16” x 2 5/16”
Material: stainless steel
Weight: 0.1

Oval lid heat indicator for some Tera Gear grills. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

Round temperature gauge for some Tera Gear grills. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Part Number: GG-TG4
Weight: 0.15

Universal bolt-on heat indicator replaces most factory installed indicators with 1 1/2” bolt centers for some Tera Gear grills. Stainless steel case.

Part Number: TG-2B
Weight: 0.2