Home > Charbroil Grill Models > Charbroil 463234711Char-Broil LP gas outdoor BBQ grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463234711
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Charbroil model: 463234711
463234711 Burners
Stainless steel straight pipe burner; uses electrode/wire # 04432 for Charbroil model 463234711.
Replaces Charbroil factory part# G431-0300-W2
Part Number: 16781
Dimensions: 14 11/16” x 1”
Material: stainless steel
Weight: 0.7
$32.54
463234711 Burner Brackets and Carryovers
Burner crossover tube for Charbroil model 463234711.
Replaces Charbroil factory part# G501-0015-W1
Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.09
463234711 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of four (4).
Replaces Charbroil factory part# G438-0020-W1
Part Number: 68764
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 37 1/4”
Material: gloss cast iron
Weight: 18.1
$121.32
463234711 Heat Tents
Stainless steel aftermarket vented Heat Tent.
- Stainless equivalent of part 98531
- Sold individually
- Made in USA
Part Number: 98531-SS
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.7
$23.47
Porcelain steel Heat Tent. Sold individually. Fits many Urban, Range Master, Kenmore, Thermos and Char-Broil Classic grills.
This part replaces original part numbers: 80008530, 80029725, G430-0005-W1.
Part Number: 98531
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 0.6
$35.00 $23.49
463234711 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Burner mounted electrode for use with 15591 and 15491 burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G501-0010-W2
Part Number: 04430
Material: ceramic
Weight: 0.1
$12.47
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G651-1300-W1
Part Number: 03350
Weight: 0.7
$31.96
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G651-5103-W1
Part Number: 05223
Material: ceramic
Weight: 0.1
$9.42
463234711 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Replaces Charbroil factory part# G431-0020-W2
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463234711 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57