Home > Charbroil Grill Models > Charbroil 463235714Char-Broil Gas Grill K6b 650 Lidded Sideburners
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for Charbroil model: 463235714 (Classic)
463235714 (Classic) Burners
Stainless steel burner for Charbroil model 463235714.
Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9
$34.77
463235714 (Classic) Burner Brackets and Carryovers
stainless steel cross-over burner for Charbroil model 463235714.
Part Number: 05592
Dimensions: 6 3/8” x 0 13/16”
Material: stainless steel
Weight: 0.1
$14.85
463235714 (Classic) Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of four (4).
Part Number: 68764
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 37 1/4”
Material: gloss cast iron
Weight: 18.1
$121.32
463235714 (Classic) Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Also known as part number G550-0006-W1.
Part Number: 96281
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 1.0
$26.50 $19.99
Stainless steel aftermarket flame tamer.
- Stainless equivalent of part 96281
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Alao known as part number G550-0006-W1.
Part Number: 96281-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.6
$25.40
463235714 (Classic) Igniter Components
Universal 2 5/8” adapter wire with female round and male
spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.35
Burner mounted replacement electrode for use with burner 15641.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03351
Material: ceramic
Weight: 0.2
$12.38
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99
Universal three-outlet battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Electrode with 24.5” wire that has a female spade/flat end for Charbroil model 463235714. To lengthen the wire use adapter # 03198 and extension wire # 03750.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1
$9.89
463235714 (Classic) Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
463235714 (Classic) Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60