Home > Charbroil Grill Models > Charbroil 463274419Char-Broil Performance Series 6-Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts to fit Charbroil model: 463274419 (Performance)
stainless steel burner for Charbroil model 463274419.
Part Number: 10081
Dimensions: 17 3/4” x 0 5/8”
Material: stainless steel
Weight: 0.4
$36.16
stainless steel cross-over for Charbroil model 463274419.
Part Number: 00071
Dimensions: 5 1/16” x 0 3/4”
Material: stainless steel
Weight: 1.0
$15.11
matte finish cast iron
cooking grid for Charbroil model 463274419.
Part Number: 60063
Dimension Front-to-Back: 18 3/16”
Dimension Side-to-Side: 22 1/4”
Material: matte cast iron
Weight: 13.4
$103.29
stainless steel Heat Tent for Charbroil model 463274419.
Part Number: 90061
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 2 1/16”
Material: stainless steel
Weight: 0.6
$17.70
Universal battery powered push button ignitor.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03330
Weight: 0.5
$18.48
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with three (3)
spade connectors. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99
Push-button electronic igniter with three (3)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3008
Weight: 0.2
$18.48
Ignition electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04450
Dimensions: 3 5/16” x 0 7/8”
Weight: 0.1
$9.89
electrode
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05223
Material: ceramic
Weight: 0.1
$9.42
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
Round heat indicator.
- Single probe
- 1 13/16” diameter
- Requires 3/8” mounting hole
Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1
$15.11
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73