Home > Charbroil Grill Models > Charbroil 463347518Char-Broil Performance 5-Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for Charbroil model: 463347518 (Performance)
stainless steel burner for Charbroil model 463347518.
Replaces Charbroil factory part# G470-5200-W1
Part Number: 10081
Dimensions: 17 3/4 x 0 5/8
Material: stainless steel
Weight: 0.4
$36.16
stainless steel cross-over for Charbroil model 463347518.
Replaces Charbroil factory part# G470-2G01-W1
Part Number: 00071
Dimensions: 5 1/16 x 0 3/4
Material: stainless steel
Weight: 1.0
$15.11
matte finish cast iron
cooking grid for Charbroil model 463347518.
Part Number: 60163
Dimension Front-to-Back: 18 3/16
Dimension Side-to-Side: 25
Material: matte cast iron
Weight: 12.0
$119.50
stainless steel Heat Tent for Charbroil model 463347518.
Replaces Charbroil factory part# G470-0004-W1A
Part Number: 90061
Dimension Front-to-Back: 17
Dimension Side-to-Side: 2 1/16
Material: stainless steel
Weight: 0.6
$17.70
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G470-5503-W1
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G470-5503-W1
Part Number: 03320
Weight: 0.3
$27.78
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
Ignition electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Charbroil factory part# G432-8S01-W1
Part Number: 04450
Dimensions: 3 5/16 x 0 7/8
Weight: 0.1
$9.89
Round heat indicator.
- Single probe
- 1 13/16 diameter
- Requires 3/8 mounting hole
Part Number: 00018
Dimensions: 1 13/16 x 1 13/16
Weight: 0.1
$15.11
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2 x 16
Weight: 1.5
$22.60
Deluxe venturi brush with 11 coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31