Home > Fiesta Grill Models > Fiesta FGF50069-U403
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Fiesta grill. This is best done with the old parts out of the grill. Verify your Fiesta grill model number.
Replacement grill parts to fit Fiesta model: FGF50069-U403
FGF50069-U403 Burners
Stainless steel burner; uses electrode/connector wire 05691 (original OEM electrode/connector wire cannot be installed on this burner) for Fiesta model FGF50069-U403.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Jan 2024.
Part Number: 15691
Dimensions: 15 3/4” x 1”
Material: stainless steel
Weight: 0.8
$30.18
FGF50069-U403 Cooking Grids
Cast iron
cooking grids (set of 3).
Porcelain treated, matte finish.
Part Number: 65693
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 27 3/8”
Material: cast iron
Weight: 15.0
$101.22
Premium universal cooking grids. Set of three (3) grids. Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 17 1/8”
- Side-to-Side: 9 1/8”
Total Side-to-Side: 27 3/8”Part Number: 65693-UNI-X3
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 27 3/8”
Material: cast iron
Weight: 15.45
$123.05
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 65693-UNI-X3 for a set of three (3).
Part Number: 65693-UNI
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 9 1/8”
Material: cast iron
Weight: 5.15
$48.43
FGF50069-U403 Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Electrode and connector wire; used on burner 15691.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 05691
Material: ceramic
Weight: 0.1
$8.99
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
FGF50069-U403 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73