Home > Sams Grill Models > Sams DGB730SNB-DDyna-Glo model DGB730SNB-D Dual Fuel 2-Burner Propane Gas and Charcoal Grill in Black and Stainless Steel
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sams grill.
Replacement grill parts to fit Sams model: DGB730SNB-D
DGB730SNB-D Burners
104-13011-R-X2 Main Burner, Set of two (2). Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:
- DGB390BNP
- DGB390SNP
- DGB730SNB
- M365 Series
May fit other models.
This part replaces original Dyna-Glo burner # 104-13011.
Part Number: DG1-104-13011-R-X2
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 1.1
$64.31
104-13011-R Main Burner. Stainless steel. Fits Dyna-Glo DGB390, DGB730, and M365 series grills including:
- DGB390BNP
- DGB390SNP
- DGB730SNB
- M365 Series
May fit other models.
This part replaces original Dyna-Glo burner # 104-13011.
Part Number: DG1-104-13011-R
Dimensions: 16 3/8” x 1”
Material: stainless steel
Weight: 0.5
$34.77
DGB730SNB-D Heat Tents
144-13003-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.
Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 144-13003.
Part Number: DG1-144-13003-R-X2
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 1.0
$50.13
144-13003-R Heat tent. Porcelain enameled steel. Sold individually.
Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This heat tent replaces original Dyna-Glo part 144-13003.
Part Number: DG1-144-13003-R
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 4 1/2”
Material: porcelain steel
Weight: 0.5
$26.58
DGB730SNB-D Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
144-13012-R-X2 Ignition electrode and ignition wire assembly. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-144-13012-R-X2
Material: ceramic
Weight: 0.2
$23.89
144-13012-R Ignition electrode and ignition wire assembly. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-144-13012-R
Material: ceramic
Weight: 0.1
$12.47
144-13007-R Electronic ignition. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: DG1-144-13007-R
Weight: 0.3
$16.46
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
DGB730SNB-D Grease Trays
Replacement stainless steel grease pan with grease cup and holder. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA
.
Replaces Sams factory part# DYG-144-04013
Part Number: 144-04013-R
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20
$76.35
Replacement stainless steel ash pan with small preassembled handle. Made in USA
.
Replaces Sams factory part# DYG-154-13104
Part Number: 154-13104-R
Dimensions: 17 1/2” x 18 9/16”
Material: stainless steel
Weight: 4.15
$68.74
DGB730SNB-D Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3” diameter
- Requires 3/8” mounting hole
Replaces Sams factory part# DYG-104-12005
Part Number: 00016
Dimensions: 3” x 3”
Weight: 0.2
$15.11
DGB730SNB-D Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96