Home > Sams Grill Models > Sams M5205ALP
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Sams grill.
Replacement gas grill parts for Sams model: M5205ALP
M5205ALP Burners
P02008004A-R-X3 Main Burners. SET OF THREE (3). Stainless steel center-fed U burners.
Fits Sam's Club Member's Mark LP models:
Replaces original Member's Mark (Grand Hall) part # P02008004A.
May fit other models
Part Number: P02008004A-R-X3
Dimensions: 16 1/8” x 5 1/8”
Material: stainless steel
Weight: 6.0
$219.56
P02008004A-R Main Burner. Stainless steel center-fed U burner.
Fits Sam's Club Member's Mark LP models:
May fit other models.
Replaces original Member's Mark (Grand Hall) part # P02008004A.
Available in an economical 3-burnet set.
Part Number: P02008004A-R
Dimensions: 16 1/8” x 5 1/8”
Material: stainless steel
Weight: 2.0
$80.26
M5205ALP Cooking Grids
Premium quality stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it.
- 304 commercial grade stainless steel
- 1/4” diameter solid stainless rods
- Dimensions: 18 7/8” x 10”
- Made in USA .
- Sold individually.
Part Number: CLS9151
Dimension Front-to-Back: 18 7/8”
Dimension Side-to-Side: 10”
Material: solid stainless steel
Weight: 4.0
$38.34
Stainless steel
cooking grid set.
- 5/16” diameter stainless rods
- 304 stainless steel
Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1
$195.93
Cast iron
cooking grids (set of 3).
Porcelain enameled, glossy finish.
Part Number: 65223
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: gloss cast iron
Weight: 22.0
$158.35
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 6 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Dimensions: 19 1/4” x 10 1/4”
- Made in USA .
- Sold individually.
See part CLA-GS0005-X3 for a more economical 3-pack.
Replaces Sams factory part# P01604002B
Part Number: CLA-GS0005
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 1/4”
Material: stainless steel
Weight: 6.3
$101.27
Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 19 1/4”
- Side-to-Side: 10 3/8”
Total Side-to-Side: 31 1/8”Part Number: 65223-UNI-X3
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 31 1/8”
Material: cast iron
Weight: 21.3
$159.91
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 65233-UNI-X3 for a set of three (3).
Part Number: 65223-UNI
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 7.10
$60.53
M5205ALP Savor Plates
Savor Plate Rack. Heavy duty, 304 premium grade stainless steel with 5/16” rods. Each rack holds three (3) P01804006A-R ceramic flame tamers (sold separately).
NOTE: This is an aftermarket part made to replace original part number P01717002E, which is no longer available.
Fits models:
- M5205ALP
- M5205ANG
- and others
Replaces Sams factory part# P01717002E
Part Number: P01717002E-R
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 9”
Material: stainless steel
Weight: 1.0
$31.14
Ceramic Savor Plate. Measures 7 1/16” x 4 3/4”. Box of 4.
Note: This part is used in racks P01717003E, and P01717002E.
Fits models:
- M3905ALP
- M3905ANG
- M5205ALP
- M5205ANG
- And others
Replaces Sams factory part# P01804006A
Part Number: P01804006A-R
Dimension Front-to-Back: 7 1/16”
Dimension Side-to-Side: 4 3/4”
Material: ceramic
Weight: 4.0
$32.85 $29.99
M5205ALP Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Sams factory part# P02502134C
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Sams factory part# P02502134C
Part Number: 03340
Weight: 0.5
$31.50
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
M5205ALP Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73