Home > Vermont Castings Grill Models > Vermont Castings VCS3018
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Vermont Castings grill.
Part diagrams and owners manuals for Vermont Castings model: VCS3018
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Vermont Castings model: VCS3018
VCS3018 Burners
Stainless steel burner for Vermont Castings model VCS3018.
Replaces Vermont Castings factory part# 50004240
Part Number: 13101
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.0
$33.04
VCS3018 Burner Brackets and Carryovers
Stainless steel Flash Tube burner support bracket. Made in USA
.
Replaces Vermont Castings factory part# 50001300B
Part Number: CLA-MS0112
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30
$18.93
VCS3018 Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Vermont Castings factory part# 50000777
Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3
$37.51
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6
$95.56
VCS3018 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Vermont Castings factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Vermont Castings factory part# 50002394
Part Number: 03350
Weight: 0.7
$31.96
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
VCS3018 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73