Vermont Castings VCS3038 | Parts ship FREE

Home > Vermont Castings Grill Models > Vermont Castings VCS3038

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Vermont Castings grill.

Part diagrams and owners manuals for Vermont Castings model: VCS3038

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Exploded parts diagram for model: VCS3038

Replacement BBQ grill parts for Vermont Castings model: VCS3038

VCS3038 Burners

Stainless steel burner for Vermont Castings model VCS3038.

Replaces Vermont Castings factory part# 50004240

Part Number: 13101
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.0

stainless steel burner for Vermont Castings model VCS3038

$33.04

All Vermont Castings Burners

VCS3038 Burner Brackets and Carryovers

Stainless steel Flash Tube burner support bracket. Made in USA

Replaces Vermont Castings factory part# 50001300B

Part Number: CLA-MS0112
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30

$18.93

All Vermont Castings Burner Brackets and Carryovers

VCS3038 Flame Tamers

Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Vermont Castings factory part# 50000777

Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3

$37.51

SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6

$95.56

All Vermont Castings Flame Tamers

VCS3038 Igniter Components

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

Wire not included. Commonly used with wire part# 03610.
Female spade connector on wire connects to male spade connector of electrode.
If used with existing wire, confirm connecting end of wire is a female spade connector
Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Replaces Vermont Castings factory part# 50000431

Part Number: 04010
Material: ceramic
Weight: 0.05

$6.58

Universal battery powered push button ignitor.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Vermont Castings factory part# 50002394

Part Number: 03350
Weight: 0.7

$31.96

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

All Vermont Castings Igniter Components

VCS3038 Accessories

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$25.40

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

$14.99

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, April 4, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.