Home > Vermont Castings Grill Models > Vermont Castings VCS3506
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Vermont Castings grill.
Part diagrams and owners manuals for Vermont Castings model: VCS3506
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement BBQ grill parts for Vermont Castings model: VCS3506
VCS3506 Burners
Stainless steel burner for Vermont Castings model VCS3506.
Replaces Vermont Castings factory part# 50003618
Part Number: 13101
Dimensions: 17” x 1”
Material: stainless steel
Weight: 1.0
$33.04
VCS3506 Burner Brackets and Carryovers
Stainless steel Flash Tube burner support bracket. Made in USA
.
Replaces Vermont Castings factory part# 50001300B
Part Number: CLA-MS0112
Dimensions: 2” x 13 1/4”
Material: stainless steel
Weight: 0.30
$18.93
VCS3506 Cooking Grids
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish.
Part Number: 68252
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 22 3/4”
Material: gloss cast iron
Weight: 13.11
$100.80
Premium quality stainless steel
cooking grids. SET OF TWO (2). Far superior to the porcelain coated steel grids it replaces.
- Made in USA
- 304 commercial grade stainless steel
- .225 diameter solid stainless rods
- Each panel measures 16 1/2” x 11 1/4”
- Overall dimensions: 16 1/2” x 22 1/2”
.
Part Number: CG-51SS-X2
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 22 1/2”
Material: stainless steel
Weight: 7.0
$85.06
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 16 1/2”
- Side-to-Side: 11 1.4”
Total Side-to-Side: 22 1/2”NOTE: Some ProChef grills this part replaces used a wider single-piece grid.
Part Number: 53502-SS-X2
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 22 1/2”
Material: stainless steel
Weight: 7.0
$85.06
Premium stainless steel cooking grid. Far superior to porcelain coated steel grids. Fits ProChef grills, may fit others.
- Made in USA
- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold individually, 2 required.
Part Number: 53502-SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 11 1/4”
Material: stainless steel
Weight: 3.50
$47.05
VCS3506 Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Vermont Castings factory part# 50000777
Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3
$37.51
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6
$95.56
VCS3506 Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Vermont Castings factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
VCS3506 Grease Trays
Stainless steel version of grease tray OEM # 50001301. NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use. Made in USA
Part Number: CLA-DS0226
Dimensions: 9 5/8” x 22 1/16”
Material: stainless steel
Weight: 2.25
$71.61
VCS3506 Regulators and Hoses
12 foot natural gas quick-connect hose.
- The hose end with SAE 3/8” female flare fitting connects to grill.
- Designed for use with quick connect coupling part# 81441
- Hose and coupling also available together as part# 80144.
Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. (Inside diameter of hose is 3/8” and the outside is about 5/8”.) See our
flare fitting description for information on measuring and sizes.
Replaces Vermont Castings factory part# 50000198
Part Number: 81442
Weight: 2.3
$46.34
Brass 3/8” natural gas quick connect coupling.
$35.18
Five piece 3/8” natural gas quick disconnect set includes:
- Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
- Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
- Hansen & Sturgis dust cover
- plastic dust plug
- Plastic 3/8 MPT Snap Tite
- Suitable up to approximately 60,000 BTU.
Part Number: ASCPL-1
Weight: 3.0
$75.71
VCS3506 Heat indicators and Meat Thermometers
Genuine OEM Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
VCS3506 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31