Home > Vermont Castings Grill Models > Vermont Castings VM600BSN
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Vermont Castings grill.
Replacement grill parts to fit Vermont Castings model: VM600BSN
VM600BSN Burners
Commercial premium grade stainless steel burner for Vermont Castings model VM600BSN.
Replaces Vermont Castings factory part# 50003100
Part Number: 13001
Dimensions: 17” x 1”
Material: stainless steel
Weight: 0.8
$42.40 $24.00
Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Sold individually, number required varies. Use one per burner.
- Includes mounting bolt and nut
- Includes extra holes for mounting to grill, if necessary.
- Comes with complete installation instructions.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Made in USA
Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11
$17.92
Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.
- Premium grade stainless steel
- Includes gasket and mounting screw
- Comes with complete installation instructions
- Sold individually.
For models:
- CF9080/85/86
- VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
- VCS3507/4007/5007/3507BI/5007BI
Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16
$24.70
VM600BSN Cooking Grids
Cast iron
cooking grid.
Porcelain enameled, glossy finish.
Replaces Vermont Castings factory part# 50001227
Part Number: 61271
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/8”
Material: gloss cast iron
Weight: 7.0
$59.01
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 61271-UNI
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 9 1/16”
Material: cast iron
Weight: 5.45
$67.49
VM600BSN Flame Tamers
Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Vermont Castings factory part# 50000877
Part Number: CLA-TS0016
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 1.3
$37.51
SET OF THREE/3 PACK Stainless steel Flame Tamer. Sold individually, number required varies. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0016-X3
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 3.6
$95.56
VM600BSN Igniter Components
Rotary
piezo spark generator. Two
round connector leads send spark to both main burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Vermont Castings factory part# 50000111
Part Number: 03220
Weight: 0.2
$17.41
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Replaces Vermont Castings factory part# 50000431
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
VM600BSN Heat indicators and Meat Thermometers
Genuine OEM Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
VM600BSN Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59