Home > Academy Sports Grill Models > Academy Sports BQ06W1C-AOutdoor Gourmet 4-Burner LP gas grill with side burner and rear rotisserie burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Academy Sports grill.
Replacement gas grill parts for Academy Sports model: BQ06W1C-A
BQ06W1C-A Burners
Stainless steel tube burners. SET OF FOUR (4).
Includes:
WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.
Part Number: 16231-X4
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 2.0
$111.43
Stainless steel tube burner.
Includes:
WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.
Part Number: 16231
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.50
$34.77
BQ06W1C-A Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 59501
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 6 1/16”
Material: porcelain steel wire
Weight: 2.6
$38.84
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 63113
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 24 3/4”
Material: gloss cast iron
Weight: 15.12
$104.92
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).
Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45
$51.52
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 65131-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.55
$33.23
BQ06W1C-A Heat Plates
Stainless steel
heat plate for Academy Sports model BQ06W1C-A.
Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7
$29.45
BQ06W1C-A Flame Tamers
Stainless steel Flame Tamer. Made in the USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA Part Number: CLA-TS0137
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 5/16”
Material: stainless steel
Weight: 1.19
$24.81
BQ06W1C-A Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
Burner mounted electrodes with male spade connectors. SET OF FOUR (4). Includes small mounting bolts and nuts.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 04022-X4
Material: ceramic
Weight: 0.4
$25.74
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
BQ06W1C-A Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59