Home > Academy Sports Grill Models > Academy Sports FSOGBG1108
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Academy Sports grill.
Replacement gas grill parts for Academy Sports model: FSOGBG1108
FSOGBG1108 Cooking Grids
Cast iron
cooking grids (set of 3).
Porcelain enameled, glossy finish.
Part Number: 69983
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 34 7/8”
Material: gloss cast iron
Weight: 19.5
$95.55
FSOGBG1108 Heat Plates
Porcelain steel
Heat Plate. Sold individually.
Part Number: 91591
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$25.40 $16.99
Stainless steel aftermarket flame tamer
heat plate.
- Stainless equivalent of part 91591
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 91591-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 1.0
$27.99 $17.21
FSOGBG1108 Igniter Components
Small AA battery powered push button spark generator.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03342
Weight: 0.3
$31.50
Electrode and connector wire with female spade end for main burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 09581
Dimensions: 3 9/16” x 1 1/16”
Material: ceramic
Weight: 0.1
$11.25
FSOGBG1108 Heat indicators and Meat Thermometers
Round heat indicator.
- Single probe
- 3 1/8” diameter
- Requires .60” mounting hole
WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".
Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20
$19.15
FSOGBG1108 Accessories
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57