Every Grease Tray we have

Universal 12”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0376
Material: galvanized steel
Weight: 0.65

Universal 19”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0378
Material: galvanized steel
Weight: 1.10

Upper grease tray heat shield.

• The grease tray upper heat shield fits beneath the burners
• The original OEM part consists of two pieces, the CLA-MS0076 is a fully functional single-piece replacement

Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0076
Dimensions: 9 1/2” x 30 3/4”
Material: stainless steel
Weight: 2.4

Lower grease tray heat shield. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0077
Dimensions: 9 1/2” x 27”
Material: stainless steel
Weight: 2.4

Upper heat shield for grease tray with heat shield extension attached (two pieces assembled). Made in USA .

Part Number: CLA-MS0123
Dimensions: 10 1/4” x 27 9/16”
Material: stainless steel
Weight: 4.30

Stainless steel lower heat shield for grease tray. Made in USA .

Part Number: CLA-MS0124
Dimensions: 10 9/16” x 28 3/4”
Material: stainless steel
Weight: 2.70

A stainless steel replacement grease cup/pan holder that includes (3) common, disposable mini-loaf pans. Made in USA . The original grease cup/pan was discontinued by manufacturer. Fits tray part numbers SP455-42 and SP5385-42.

Part Number: CLA-MS0280
Dimensions: 7” x 9 1/4”
Material: stainless steel
Weight: .45

Stainless steel upper heat shield for grease tray. Made in USA .

Part Number: CLA-MS0323
Dimensions: 8” x 31 1/4”
Material: stainless steel
Weight: 2.15

Universal 15”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0374
Material: stainless steel
Weight: 0.60

Universal 8”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0375
Material: stainless steel
Weight: 0.35

Universal 12”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0377
Material: stainless steel
Weight: 0.95

Universal 19”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0379
Material: stainless steel
Weight: 1.5

Grease pan/cup holder for grease trays which use pan/cup OEM # 22009-901. It can be slightly bent inward to clasp into opening of the grease tray. Can also be bolted onto a flat grease tray surface. Includes three common aluminum mini loaf pans. Measures 7” x 5” x 3.25”
Made in USA

Part Number: CLA-MS0383
Dimensions: 7” x 5”
Material: stainless steel
Weight: .45

403-03005-01-R Stainless steel ash pan with handle. Made in USA .

Fits Dyna-Glo models: DGN576SNC and DGN576SNC-D. May fit other models.

Replaces original Dyna-Glo OEM ash pan part# 403-03005-01 and handle part# 403-01005-02.

Part Number: DG3-403-03005-01-R
Dimensions: 17 15/16” x 28 9/16”
Material: stainless steel
Weight: 5.2

404-03005-01-R Stainless steel replacement ash pan kit. Comes unassembled. Incudes a small replacement handle with hardware. The replacement ash pan also includes screw holes which will allow the old handle to be installed onto the new ash pan. Made in USA .

Replacements for:

• 404-03005-01 Ash pan
• 403-01005-02 Ash pan handle with hardware

Fits Dyna-Glo models: DGN405DNC, DGN405DNC-D, DGN405SNC, DGN405SNC-D. May fit other models.

Note: This is an aftermarket part designed to replace Dyna-Glo original parts 404-03005-01 and 403-01005-02.

Part Number: DG3-404-03005-01-R
Dimensions: 18” x 19 1/2”
Material: stainless steel
Weight: 4.0

Stainless steel grease cup for JNR, WNK, and TJK.

Part Number: GG-GC
Weight: 0.3

403-03005-01-R Stainless steel ash pan with handle. Made in USA .

Fits Master Forge models: MFJ576DNC and MFJ576DNC-D. May fit other models; measure and compare.

Replaces original Master Forge OEM ash pan part# 403-03005-01 and handle part# 403-01005-02.

WARNING: Before ordering this ash tray, remove the old tray and measure and compare to our tray. Also, verify your model number on the certification tag of your grill. The ash trays for models MFJ576DNC and MFJ576CNC are not interchangeable; it best to shop by model number.

Part Number: MF3-403-03005-01-R
Dimensions: 17 15/16” x 28 9/16”
Material: stainless steel
Weight: 5.2

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.
Made in USA

Part Number: S15111
Material: stainless steel
Weight: 0.02

Mini grease bucket used with wire holder S15111.

Part Number: S15112
Weight: .03

Genuine OEM disposable grease pans. Package of 10. Each measures 4.75”x6”x1”.

Part Number: S15115
Dimensions: 4 3/4” x 6”
Material: aluminum
Weight: 0.25

Phoenix OEM Cast Aluminum Drip Tray

Part Number: SDSSDT-A
Dimensions: 23” x 14 3/4”
Material: cast aluminum
Weight: 7.45

SG4-910-R Holland Pipe Used With drip tray.

Part Number: SG4-910-R
Dimensions: 8” x 1”
Material: galvanized steel
Weight: 3.33

GREASE CUP

Part Number: SP115-9
Weight: 1.0

Stainless steel grease tray assembly; replaces discontinued OEM # SP244-9. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA .

Part Number: SP244-9-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

Stainless steel grease tray assembly; replaces discontinued OEM #SP455-42. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA .

Part Number: SP295A-9-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

A stainless steel replacement grease cup/pan holder that includes (3) common, disposable mini-loaf pans; the original grease cup/pan has been discontinued by manufacturer. Fits tray part# SP455-42 and SP5385-42.
Made in USA

Part Number: SP296-9-R
Dimensions: 7” x 9 1/4”
Material: stainless steel
Weight: .45

Stainless steel grease tray assembly; replaces discontinued OEM #SP455-42. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA .

Part Number: SP383-9-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

Stainless steel grease tray assembly; replaces discontinued OEM #SP455-42. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA .

Part Number: SP455-42-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

Stainless steel grease tray assembly; replaces discontinued OEM # SP5386-42. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA .

Part Number: SP5386-42-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

Stainless steel grease tray assembly. Replaces discontinued OEM # SP91-9 grease tray and small grease pan OEM # SP103-9. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) common mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions.
Made in USA

Part Number: SP91-9-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0