Grease Trays for Dyna-Glo grills

Replacement stainless steel grease pan with grease cup and holder for some Dyna-Glo grills. Includes side bracket and attached bottom heat shield (9 1/2” x 9 1/2”). Made in USA .

Part Number: 144-04013-R
Dimensions: 18 3/4” x 15 7/16”
Material: stainless steel
Weight: 4.20

Replacement stainless steel ash pan with small preassembled handle for some Dyna-Glo grills. Made in USA .

Part Number: 154-13104-R
Dimensions: 17 1/2” x 18 9/16”
Material: stainless steel
Weight: 4.15

Stainless steel grease tray; has drip hole and includes grease cup and grease cup holder for some Dyna-Glo grills. Made in USA .

Part Number: CLA-DS0248
Dimensions: 15” x 28 9/16”
Material: stainless steel
Weight: 4.5

Stainless steel grease draining tray with grease cup and holder for some Dyna-Glo grills. Made in USA .

Part Number: CLA-DS0276
Dimensions: 15 3/4” x 26 7/8”
Material: stainless steel
Weight: 4.6

Grease pan with a new design made of stainless steel and not an exact duplicate of the original; is a fully functional replacement for some Dyna-Glo grills. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0279
Dimensions: 7 1/8” x 19 5/16”
Material: stainless steel
Weight: 2.7

Stainless steel grease pan with mini grease cup & holder for some Dyna-Glo grills. Made in USA . NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-DS0328
Dimensions: 9 1/2” x 20 1/2”
Material: stainless steel
Weight: 2.15

Universal 15”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0371
Material: galvanized steel
Weight: 0.45

Universal 8”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0372
Material: galvanized steel
Weight: 0.25

Universal 12”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0376
Material: galvanized steel
Weight: 0.65

Universal 19”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MG0378
Material: galvanized steel
Weight: 1.10

Universal 15”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0374
Material: stainless steel
Weight: 0.60

Universal 8”x4” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0375
Material: stainless steel
Weight: 0.35

Universal 12”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0377
Material: stainless steel
Weight: 0.95

Universal 19”x8” grease tray extension bracket that can be used to modify some of our grease trays to fit into your gas grill for some Dyna-Glo grills. For more information, click here to send an email to Carl. Please provide your grill's brand name, model number and a photo of your old grease tray along with measurements.
Made in USA

Part Number: CLA-MS0379
Material: stainless steel
Weight: 1.5

403-03005-01-R Stainless steel ash pan with handle for some Dyna-Glo grills. Made in USA .

Fits Dyna-Glo models: DGN576SNC and DGN576SNC-D. May fit other models.

Replaces original Dyna-Glo OEM ash pan part# 403-03005-01 and handle part# 403-01005-02.

Part Number: DG3-403-03005-01-R
Dimensions: 17 15/16” x 28 9/16”
Material: stainless steel
Weight: 5.2

404-03005-01-R Stainless steel replacement ash pan kit for some Dyna-Glo grills. Comes unassembled. Incudes a small replacement handle with hardware. The replacement ash pan also includes screw holes which will allow the old handle to be installed onto the new ash pan. Made in USA .

Replacements for:

• 404-03005-01 Ash pan
• 403-01005-02 Ash pan handle with hardware

Fits Dyna-Glo models: DGN405DNC, DGN405DNC-D, DGN405SNC, DGN405SNC-D. May fit other models.

Note: This is an aftermarket part designed to replace Dyna-Glo original parts 404-03005-01 and 403-01005-02.

Part Number: DG3-404-03005-01-R
Dimensions: 18” x 19 1/2”
Material: stainless steel
Weight: 4.0