Home > Amana Grill Models > Amana AM30Amana SS 4-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Amana grill.
Part diagrams and owners manuals for Amana model: AM30
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement BBQ grill parts for Amana model: AM30
AM30 Burners
Stainless steel burner.
NOTE: Before you order this burner, remove the old burner from your grill and measure and compare to this burner. The manufacturer made different burners for certain years in which the same model number was used.
Part Number: 16731
Dimensions: 17 1/8” x 0 3/4”
Material: stainless steel
Weight: 0.6
$31.72
AM30 Cooking Grids
Stainless steel
cooking grids with solid 1/4” rods (set of 3) for Amana model AM30.
Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0
$185.71
Porcelain steel
cooking grids. SET OF THREE (3).
Replaces Amana factory part# FCTG2908009
Part Number: 50263
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8
$85.04
AM30 Flavor Grids
Stainless Flavor Grid (
heat plate/Flame Tamer). Sold individually, number required varies.
Part Number: AMHP1
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0
$17.61
SET OF THREE/3 PACK Flavor Grid, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6
$48.77
SET OF FOUR/4 PACK Flavor Grid, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8
$62.52
Flavor Grid, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0152
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 1.2
$17.61
AM30 Igniter Components
Ceramic electrode with mounting hardware.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 01683
Material: ceramic
Weight: 0.1
$12.47
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ceramic electrode and 40” wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 06730
Material: ceramic
Weight: 0.1
$8.81
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
Genuine OEM 21” wire for side burner or other applications. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T12
Dimensions: 21
Weight: 0.05
$4.21
AM30 Heat indicators and Meat Thermometers
heat indicator for Amana model AM30.
Replaces Amana factory part# FCCS0007030
Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2
$15.90
AM30 Miscellaneous Repair Parts
2-Burner Z bar.
- Replaces OEM part# 40335008
- Stainless steel
- Made in USA
Part Number: CLA-MS0303
Dimensions: 3 5/8” x 7 7/16”
Material: Stainless Steel
Weight: 0.25
$10.21
AM30 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59