Amana AM30LP

Stainless steel burner.

NOTE: Before you order this burner, remove the old burner from your grill and measure and compare to this burner. The manufacturer made different burners for certain years in which the same model number was used.

Part Number: 16731
Dimensions: 17 1/8” x 0 3/4”
Material: stainless steel
Weight: 0.6

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Amana model AM30LP.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

Porcelain steel cooking grids. SET OF THREE (3).

• Porcelain enameled, glossy finish
• 3 panels, each 17 1/2” x 8 5/8”
• Total width: 25 7/8”

Replaces Amana factory part# FCTG2908009

Part Number: 50263
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 25 7/8”
Material: porcelain steel wire
Weight: 10.8

SET OF THREE/3 PACK Flavor Grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

SET OF FOUR/4 PACK Flavor Grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

Flavor Grid, stainless steel. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 1.2

Stainless Flavor Grid (heat plate/Flame Tamer). Sold individually, number required varies.

Replaces Amana factory part# FCTG2908026

Part Number: AMHP1
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

Ceramic electrode with mounting hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01683
Material: ceramic
Weight: 0.1

Universal battery powered push button ignitor.

• 1.5 volt
• Has six (6) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

Genuine OEM 21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

heat indicator for Amana model AM30LP.

Replaces Amana factory part# FCCS0007030

Part Number: 00013
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

2-Burner Z bar.

• Replaces OEM part# 40335008
• Stainless steel
• Made in USA

Part Number: CLA-MS0303
Dimensions: 3 5/8” x 7 7/16”
Material: Stainless Steel
Weight: 0.25

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1