Home > Amberlight Grill Models > Amberlight Regency
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Amberlight grill.
Replacement grill parts for Amberlight model: Regency
Regency Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 10602-70301
Material: stainless steel
Weight: 4.0
Dimensions: 19 1/2” x 8”
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
Part Number: 10602
Material: stainless steel
Weight: 2.8
Dimensions: 19 1/2” x 8”
Regency Venturis
Single Gasket Kit Economy Burners for Amberlight model Regency.
Part Number: SHK4
Weight: 0.01
Stainless steel single venturi, sold individually. Flexible and adjustable from 5.5” to 8”. Gasket & screws not included, see part # SHK4.
Part Number: V-11
Material: stainless steel
Weight: .3
Dimensions: 7
70301 is a straight single venturi that adjusts from 5 1/8” to 7”. Includes all necessary gaskets and screws/nuts.
Part Number: 70301
Material: zinc plated steel
Weight: 0.5
Regency Cooking Grids
Porcelain steel heavy
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
NOTE: This grid has been designated as a replacement for part # 51051 that weighed 3.5 pounds, measured 13 3/4” x 25 1/4” and it had rounded corners. Due to the rounded corners, using # 53101as a replacement is about 1 3/4” shy on the side-to-side dimension.
Part Number: 53101
Material: porcelain steel wire
Weight: 11.0
Dimensions:
- Front-To-Back: 13 3/4″
- Side-To_Side: 23 1/2″
Regency Rock Grates
Rock grate for holding lava rock or ceramic briquettes.
NOTE:This
rock grate is no longer available. It will be replaced with # CLA-RSX0007 that measures 13” x 19” front-to-back dimension; losing 1.75” inch on width will not impact heat distribution.
Part Number: BG-22
Material: carbon steel
Weight: 2.5
Dimensions:
- Front-To-Back: 13 1/8″
- Side-To_Side: 20 3/4″
Image not available
Regency Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
Regency Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.
- Works with both charcoal and gas grills.
- Easy to use and refill.
- Long lasting cast iron.
Part Number: 00150
Material: cast iron
Weight: 3.90
Dimensions: 5 1/4” x 8 3/8”
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.
Part Number: 40070
Material: stainless steel
Weight: 2.12
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Rib & Roast Rack. Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.
Part Number: 41616
Material: stainless steel
Weight: 0.5
Stuffed Burger Press
The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.
Part Number: 24795
Weight: .3
|
Amberlight Regency - 02-Nov-26
|
We ship Amberlight BBQ parts worldwide
Back to Amberlight grill parts