Knobs and Handles for Aussie grills

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Aussie grill.

Aussie Knobs and Handles

Universal control knob with with long 1” shaft for some Aussie grills. Counter-clockwise bezel.
  • The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
  • Off position D-Value: Selectable (12, 3, 6, or 9 o'clock)
  • Knob diameter: 2”
  • Socket diameter: 8mm
  • Knob shaft: 1 inch


Part Number: 00110
Material: plastic
Weight: 0.1
Dimensions: 2” x 2”

$7.57






Universal control knob for some Aussie grills. Counter-clockwise bezel.
  • The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position required for your grill
  • Off position D-Value: Selectable
  • Knob diameter: 2 1/16”
  • Socket diameter: 8mm
  • Knob shaft: 1/2”


Part Number: 00310
Material: plastic
Weight: 0.1
Dimensions: 2 1/16” x 2 1/16”

$7.04






Universal 24” hardwood front lid handle for some Aussie grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.

Part Number: 01200
Material: Wood
Weight: 0.8
Dimensions: 24

$19.58






Universal black control knob for some Aussie grills. Counter-clockwise bezel.
  • Off position D-Value: Selectable
  • Knob diameter: 2 1/16”
  • Socket diameter: 8mm
  • Knob shaft: None


Part Number: 01800
Material: plastic
Weight: 0.05
Dimensions: 2 1/16” x 2 1/16”

$6.61






Universal 2 5/16” knob for some Aussie grills.
  • Selectable D-Value
  • Selectable socket diameter - 6mm or 8mm.
  • Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
  • Includes 6 shaft inserts and set screw.
  • Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).


Part Number: 02342
Material: plastic
Weight: 0.20
Dimensions: 2 5/16” x 2 5/16”

$19.38






Black control knob (Some originals may have been chrome) for some Aussie grills.
  • Off position D-Value: 12 o'clock
  • Knob diameter: 2 3/16”
  • Socket diameter: 6mm
  • Knob shaft: None

TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive Nov 6th.

Part Number: 03430
Material: plastic
Weight: 0.2
Dimensions: 2 3/16” x 2 3/16”

$12.53



Part# 03430 fits these 2 Aussie models:




Universal hardwood lid handle for some Aussie grills.

Part Number: 25950
Material: wood
Weight: 0.3

$17.30






Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4” for some Aussie grills.
  • Off position D-Value: 12 or 6 or 3 or 9 o'clock
  • Knob diameter: 2 3/16”
  • Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
  • Knob shaft: Flat or 1”


Part Number: 25960
Weight: 0.20

$15.67






Universal stainless steel lid handle for some Aussie grills. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0055
Material: stainless steel
Weight: 1.0
Dimensions: 23 5/8

$45.35






Universal knobs, fits most BBQ valves, moveable dial face, counter-clockwise bezel for some Aussie grills. PACK OF TWO
  • The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
  • Off position D-Value: Selectable
  • Knob diameter: 2 1/16”
  • Socket diameter: 8mm
  • Knob shaft: 1/2”


Part Number: K-10B
Material: N/A
Weight: 0.10
Dimensions: 2

$11.95






Durable black phenolic lid handle with threaded brass insert for some Aussie grills. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.

Part Number: PH-2B
Material: 6.59
Weight: .3
Dimensions: 3 1/2

$8.55




We can ship parts for Aussie gas BBQ grills worldwide



Back to Aussie grill parts


GRILLING  ACCESSORIES

Free USA shipping (contiguous 48 states only) on all Aussie part orders $79 and over

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy