Backyard Grill GBC1449W-C

Stainless steel burner for Backyard Grill model GBC1449W-C.

Replaces Backyard Grill factory part# 55-23-031

Part Number: 19991
Dimensions: 16 9/16” x 1”
Material: stainless steel
Weight: 0.6

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of three (3).

Replaces Backyard Grill factory part# 55-23-027

Part Number: 61613
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 27 3/4”
Material: matte cast iron
Weight: 11.12

Stamped porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of three (3).

Replaces Backyard Grill factory part# 55-24-326

Part Number: 51343
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 28 1/2”
Material: stamped porcelain steel
Weight: 6.2

Cast iron cooking grid. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-59P-CI
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 9 1/4”
Material: cast iron
Weight: 5.45

Porcelain steel Heat Plate. Sold individually.

Replaces Backyard Grill factory part# 55-10-156

Part Number: 91591
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

Stainless steel aftermarket flame tamer heat plate.

• Stainless equivalent of part 91591
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 91591-SS
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 1.0

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel grease draining tray with grease cup and holder. Made in USA .

Replaces Backyard Grill factory part# 55-23-036

Part Number: CLA-DS0276
Dimensions: 15 3/4” x 26 7/8”
Material: stainless steel
Weight: 4.6

Oval lid heat indicator. Mounts to grill with single 1.25” long threaded temperature probe in center.

Replaces Backyard Grill factory part# 55-24-043

Part Number: 072-6800-0
Dimensions: 2 15/16” x 1 7/8”
Material: stainless steel
Weight: 0.2

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7