Home > Barbeques Galore Grill Models > Barbeques Galore B3208ALP
Capt'n Cook 5-Burner LP Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Barbeques Galore grill.
Replacement BBQ grill parts for Barbeques Galore model: B3208ALP
B3208ALP Burners
Stainless steel tube burner. Includes
Replaces Barbeques Galore factory part# P02008036B
Part Number: 11631
Material: stainless steel
Weight: 0.8
Dimensions: 15 1/8 x 1
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
B3208ALP Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Replaces Barbeques Galore factory part# P01714005E
Part Number: 97071
Material: porcelain steel
Weight: 1.0
Dimensions:
- Front-To-Back: 15 5/8″
- Side-To_Side: 3 15/16″
B3208ALP Igniter Components
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Barbeques Galore factory part# P02502252C
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Barbeques Galore factory part# P02502252C
Part Number: 03320
Weight: 0.3
Ignitor collector box with ceramic electrode and male
round connector.
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
See part 02623-X4 for a more econimical 4 pack.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Barbeques Galore factory part# P026090134
Part Number: 02623
Material: ceramic
Weight: 0.2
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Barbeques Galore factory part# P02502265C
Part Number: 03350
Weight: 0.7
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
Ignitor collector boxes with ceramic electrodes and male round connectors. SET OF FOUR (4).
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 02623-X4
Material: ceramic
Weight: 0.8
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Genuine OEM 21 wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
25 wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
B3208ALP Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in any grill wide enough inside for the 24 rack.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA
.
NOTE: Before ordering this universal rack, please verify your grill has enough space to accommodate it. What's required?
- Your grill needs to be at least 24 wide on the inside . The warming rack is 6.25 front to back and stands 3.75 tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside.
Part Number: CLA-WS0040
Material: stainless steel
Weight: 4.8
Dimensions:
- Front-To-Back: 6 1/4″
- Side-To_Side: 22 7/8″
B3208ALP Accessories
GrillPro ฎ grid lifter removes both cast and stainless cooking grids.
One set of tines to remove cast and another to remove stainless cooking grids.
Stainless tip, resin handle.
Part Number: 76745
Material: stainless
Weight: .2
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16 x 4
Deluxe 13 basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.
Part Number: 42055
Weight: 0.2
Dimensions: 13
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Weight: 0.4
Dimensions: 9 x 13
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Barbeques Galore B3208ALP. We have a large inventory of BBQ accessories such as BBQ tools, baskets, grill covers in our accessories section. 02-Nov-26
|
We ship Barbeques Galore BBQ parts worldwide
Back to Barbeques Galore grill parts