Home > Barbeques Galore Grill Models > Barbeques Galore CG3CKWN
Capt'n Cook 3-Burner Gas Grill (Natural Gas)
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Barbeques Galore grill.
Replacement gas grill parts for Barbeques Galore model: CG3CKWN
CG3CKWN Burners
Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.
NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.
Part Number: 23301-CSS
Material: cast stainless steel
Weight: 3.2
Dimensions: 16” x 2 7/16”
Cast iron burner for Barbeques Galore model CG3CKWN.
Part Number: 23301
Material: cast iron
Weight: 3.9
Dimensions: 15 3/4” x 2 7/8”
CG3CKWN Cooking Grids
Cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 22005-181-R
Material: Cast iron
Weight: 7.5
Dimensions:
- Front-To-Back: 19 1/16″
- Side-To_Side: 12 1/2″
Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 19 1/8”
- Side-to-Side: 12 3/86”
Total Side-to-Side: 24 3/4”
Part Number: 62152-UNI-X2
Material: cast iron
Weight: 16.7
Dimensions:
- Front-To-Back: 19 1/8″
- Side-To_Side: 24 3/4″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 62152-UNI-X2 for a set of two (2).
Part Number: 62152-UNI
Material: cast iron
Weight: 8.35
Dimensions:
- Front-To-Back: 19 1/8″
- Side-To_Side: 12 3/8″
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually.
Part Number: 65041
Material: matte cast iron
Weight: 8.11
Dimensions:
- Front-To-Back: 19 1/8″
- Side-To_Side: 13″
Cast iron
cooking grids. SET OF TWO (2) panels.
- Porcelain treated, matte finish
- Each panel measures 19 1/8” x 12 3/8”
- Overall dimensions: 19 1/8” x 24 3/4”
Part Number: CG-58P-CI-X2
Material: cast iron
Weight: 16.7
Dimensions:
- Front-To-Back: 19 1/8″
- Side-To_Side: 12 3/8″
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Made in USA
. - Sold individually.
Part Number: CLA-GS0004
Material: stainless steel
Weight: 8.5
Dimensions:
- Front-To-Back: 19 1/4″
- Side-To_Side: 12″
CG3CKWN Cooking Grills
Cast iron cooking grill.
Porcelain treated, flat matte finish. Sold individually, number required varies.
Part Number: 66662-1PC
Material: matte cast iron
Weight: 11.25
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 12 1/2″
Cast iron cooking grills.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 66662
Material: matte cast iron
Weight: 16.10
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 25″
CG3CKWN Briquette Trays
Stainless steel Flame Tamer with 17 ceramic briquettes. This part also replaces an older 16-briquette version that was a little shorter and a bit narrower.
Part Number: TCCFT
Material: stainless steel
Weight: 5.0
Dimensions:
- Front-To-Back: 18 1/8″
- Side-To_Side: 7 1/4″
CG3CKWN Flame Tamers
Stainless steel aftermarket Flame Tamer / Heat Tent.
- Stainless equivalent of part 95131
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA

Part Number: 95131-SS
Material: stainless steel
Weight: 1.5
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 6 1/4″
Porcelain steel Flame Tamer / Heat Tent. Sold individually.
Part Number: 95131
Material: porcelain steel
Weight: 2.4
Dimensions:
- Front-To-Back: 16 1/2″
- Side-To_Side: 6 1/4″
$44.21
$29.99
CG3CKWN Igniter Components
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
CG3CKWN Accessories
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Material: ceramic
Weight: 7.2
Dimensions: 2” x 2”
Set of four 15” skewers. All stainless steel construction.
Unique v-shaped skewers keep food from spinning on shaft.
Part Number: 46074
Material: stainless steel
Weight: 0.4
Dimensions: 18” x 0 5/8”
High quality, long lasting ceramic briquettes. 90 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 90 briquettes will cover about 562 square inches. This is an area roughly 17” x 33”. For larger grills.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA
Part Number: CLA-AC0405
Material: ceramic
Weight: 11.7
Dimensions: 2” x 2”
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Non-Stick Wing Rack. A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.
Part Number: 41551
Weight: 0.5
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
|
Barbeques Galore model CG3CKWN. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. 02-Nov-26
|
We ship Barbeques Galore BBQ parts worldwide
Back to Barbeques Galore grill parts