Home > Barbeques Galore Grill Models > Barbeques Galore XG4TBWNTurbo 4-Burner LP gas grill SKU#158812
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Barbeques Galore grill.
Part diagrams and owners manuals for Barbeques Galore model: XG4TBWN
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Barbeques Galore model: XG4TBWN
XG4TBWN Burners
Cast iron burner for Barbeques Galore model XG4TBWN.
Part Number: 23301
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 3.9
$35.76
Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.
NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.
Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2
$90.92
XG4TBWN Cooking Grids
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model
Part Number: CG-60P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.65
$53.45
XG4TBWN Briquette Trays
Stainless steel
heat plate/briquette rack. Includes 16 briquettes.
Part Number: 94751
Dimensions: 16 1/2” x 6 1/2”
Material: stainless steel
Weight: 4.1
$80.85
XG4TBWN Flame Tamers
Porcelain steel Flame Tamer / Heat Tent. Sold individually.
Part Number: 95131
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.4
$40.30 $29.99
Stainless steel aftermarket Flame Tamer / Heat Tent.
- Stainless equivalent of part 95131
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 95131-SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.5
$39.40
XG4TBWN Igniter Components
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
XG4TBWN Accessories
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$40.54
Ceramic briquettes 48 pieces. Fits briquette trays
94751,
92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".
Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5
$69.08
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2
$47.58
10” Bamboo Skewers (100 pieces)
- Ideal for grilling meat and vegetables
- Soak skewers in water about 1/2 hour before using
- Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
- Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.
Part Number: 11060
Weight: 0.6
$4.09
Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.
Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0
$40.54
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73