Home > BBQ-Pro Grill Models > BBQ-Pro 146.23676310
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your BBQ-Pro grill. This is best done with the old parts out of the grill. Verify your BBQ-Pro grill model number.
Replacement BBQ grill parts for BBQ-Pro model: 146.23676310
146.23676310 Burners
Stainless steel burner with electrode-mounting bracket. The bracket is not used on all grill models. If your model does not use a burner-mounted electrode, just ignore the bracket.
Part Number: 16251
Dimensions: 14 3/4” x 1”
Material: stainless steel
Weight: 0.6
$58.53 $39.99
146.23676310 Burner Brackets and Carryovers
Stainless steel burner cross-over for BBQ-Pro model 146.23676310.
Part Number: 07001
Dimensions: 7 3/16” x 0 13/16”
Material: stainless steel
Weight: 0.1
$13.57
146.23676310 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Part Number: 96221
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel
heat plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6
$85.74
Stainless steel
heat plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0193
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.65
$25.15
146.23676310 Igniter Components
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center). Includes an extra 16” connector wire with flat female spade end and male spade end for some applications (not shown in photo).
Part Number: 00162
Material: ceramic
Weight: 0.1
$8.81
146.23676310 Heat indicators and Meat Thermometers
Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.
Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2
$14.41
146.23676310 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57