Home > BBQTEK Grill Models > BBQTEK SLG2006BPerfect Flame 4-Burner LP gas grill with side burner, Lowe's item# 13133
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your BBQTEK grill.
Part diagrams and owners manuals for BBQTEK model: SLG2006B
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for BBQTEK model: SLG2006B
SLG2006B Burners
Stainless steel tube burner.
Includes- SS tube burner
- Electrode mounting bracket (not all models use bracket)
- Spider exclusion screen
- Adjustable air shutter.
NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.
Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6
$32.54
SLG2006B Burner Brackets and Carryovers
Stainless steel burner support bracket. Made in the USA.
Made in USA Part Number: CLA-MS0212
Dimensions: 3” x 21 3/16”
Material: stainless steel
Weight: .9
$43.61
SLG2006B Cooking Grids
Cast iron
cooking grids. SET OF TWO (2) panels.
- Porcelain treated, matte finish
- Each panel measures 17 3/4” x 11 1/2”
- Overall dimensions: 17 3/4” x 23”
Part Number: CG-101PCI-X2
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 23”
Material: cast iron
Weight: 11.6
$79.43
SLG2006B Heat Plates
Stainless steel
heat plate for BBQTEK model SLG2006B.
Part Number: BBQHP1
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 0.7
$29.45
SLG2006B Flame Tamers
Stainless steel Flame Tamer. Made in the USA.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA Part Number: CLA-TS0137
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 5/16”
Material: stainless steel
Weight: 1.19
$24.81
SLG2006B Igniter Components
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.
Part Number: 04010
Material: ceramic
Weight: 0.05
$6.58
SLG2006B Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60