BBQTEK SLG2007D

Stainless steel tube burner.

Includes
• SS tube burner
• Electrode mounting bracket (not all models use bracket)
• Spider exclusion screen
• Adjustable air shutter.

NOTE:Some earlier versions of this burner, which are no longer available, were a bit larger in diameter.

Part Number: 12411
Dimensions: 16 1/2” x 1”
Material: stainless steel
Weight: 0.6

Stainless steel burner mounting bracket with integrated gas carryover tubes. Made in USA

Part Number: CLA-MS0094
Dimensions: 28 1/2” x 2 7/8”
Material: stainless steel
Weight: 1.4

Cast iron cooking grids (set of 3). Porcelain treated, matte finish.

Part Number: 60273
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 31 5/16”
Material: matte cast iron
Weight: 22.4

Premium universal cooking grids. Set of three (3). Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 3/4”
• Side-to-Side: 10 7/16”

Total Side-to-Side: 31 5/16”

Part Number: 60273-UNI-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 31 5/16”
Material: cast iron
Weight: 20.25

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60273-UNI-X3 for a set of three (3).

Part Number: 60273-UNI
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 10 7/16”
Material: cast iron
Weight: 6.75

Porcelain steel Heat Plate. Sold individually.

Part Number: 92071
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 1.0

Stainless steel heat plate/Flame Tamer.

• Sold individually
• Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0133
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.58

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

• Wire not included. Commonly used with wire part# 03610.
• Female spade connector on wire connects to male spade connector of electrode.
• If used with existing wire, confirm connecting end of wire is a female spade connector
• Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

Stainless steel front heat plate mounting bracket. Known to fit models SLG2007D and SLG2007DN. May fit other 5-Burner models, measure to confirm fit. Made in USA

Part Number: CLA-MS0095
Dimensions: 31 1/2”
Material: stainless steel
Weight: 0.35

Stainless steel rear heat plate mounting bracket. Known to fit models SLG2007D and SLG2007DN. May fit other 5-Burner models, measure to confirm fit. Made in USA

Part Number: CLA-MS0096
Dimensions: 30 3/4”
Material: stainless steel
Weight: 0.4

10” Bamboo Skewers (100 pieces)

• Ideal for grilling meat and vegetables
• Soak skewers in water about 1/2 hour before using
• Use foods that require the same amount of cooking time. Meats can be pre-cooked. Marinated foods are recommended for added flavor.
• Great for chicken or beef, ham, lamb, or veal, salami, shrimp, or scallops, mushrooms, sliced peppers, omion, carrots, cherrytomatoes, pineapples, zuccini, and apples.

Part Number: 11060
Weight: 0.6

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7