Home > Brinkmann Grill Models > Brinkmann 810-1751-S
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Replacement grill parts for Brinkmann model: 810-1751-S
810-1751-S Burners
Stainless steel tube burner. Includes
WARNING: This burner is also a functional replacement for burner # 14041 that had a 1.25 diameter and has been discontinued. Please inspect the diameter of your old burner to determine if this matters to you before ordering.
Part Number: 14011
Dimensions: 16 3/16 x 1
Material: stainless steel
Weight: 0.8
$29.12
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
810-1751-S Burner Brackets and Carryovers
Stainless steel burner cross-over tube for Brinkmann model 810-1751-S.
Part Number: 09429
Dimensions: 6 15/16 x 2 5/16
Material: stainless steel
Weight: 0.2
$13.42
810-1751-S Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 61753
Dimension Front-to-Back: 19 1/16
Dimension Side-to-Side: 27 15/16
Material: gloss cast iron
Weight: 15.6
$105.89
810-1751-S Heat Plates
Stainless steel
heat plate/ Flame Tamer. Sold individually, number required varies.
Part Number: BMHP7
Dimension Front-to-Back: 16 13/16
Dimension Side-to-Side: 3 3/16
Material: stainless steel
Weight: 0.5
$24.34
810-1751-S Heat Tents
Stainless steel Flame Tamer heat tent.
- Stainless equivalent of part 91751
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 91751-SS
Dimension Front-to-Back: 16 13/16
Dimension Side-to-Side: 3 3/16
Material: stainless steel
Weight: 0.5
$24.34
810-1751-S Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 3
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box, electrode, and 28 wire with female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 08501
Dimensions: 4 5/16
Material: stainless steel
Weight: 0.5
$13.42
810-1751-S Heat indicators and Meat Thermometers
heat indicator for Brinkmann model 810-1751-S.
Part Number: 00013
Dimensions: 3 3/8 x 2 1/16
Weight: 0.2
$15.90
810-1751-S Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Dimensions: 6 1/2 x 10
Weight: 1.1
$19.30
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96