Home > Brinkmann Grill Models > Brinkmann 810-2250-2Brinkmann Pro Series 2250 - 3 Burner Heavy-Duty Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Part diagrams and owners manuals for Brinkmann model: 810-2250-2 (Pro Series 2250)
Click small image to enlarge. Click Large image to reduce.
Double click for new window |
| |
Replacement grill parts for the Brinkmann 810-2250-2 (Pro Series 2250)
810-2250-2 (Pro Series 2250) Burners
Cast iron burner for Brinkmann model 810-2250-2.
Replaces Brinkmann factory part# 154-2300-5
Part Number: 22401
Dimensions: 16 1/4” x 2 3/8”
Material: cast iron
Weight: 3.1
$34.99
810-2250-2 (Pro Series 2250) Cooking Grills
Cast iron cooking grill.
Porcelain treated, flat matte finish. Sold individually, number required varies.
Replaces Brinkmann factory part# 115-2300-0
Part Number: 66662-1PC
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 12 1/2”
Material: matte cast iron
Weight: 11.25
$62.12
810-2250-2 (Pro Series 2250) Heat Distribution Plates
Porcelain steel Heat Distribution Plate. Sold individually.
Replaces Brinkmann factory part# 600-2302-5
Part Number: 97311
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 3 7/8”
Material: porcelain steel
Weight: 0.8
$24.40 
$17.49
SET OF THREE/3 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X3
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.1
$58.37
SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates/Flame Tamers. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156-X4
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 2.8
$74.78
Stainless steel Heat Distribution Plate/Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.e.
Part Number: CLA-TS0156
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 3 15/16”
Material: stainless steel
Weight: 0.70
$21.09
810-2250-2 (Pro Series 2250) Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box, ceramic electrode, insulating sleeve, and 14” wire with female space connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Brinkmann factory part# 600-7541-B
Part Number: 08300
Material: ceramic
Weight: 0.3
$13.92
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
810-2250-2 (Pro Series 2250) Heat indicators and Meat Thermometers
heat indicator for Brinkmann model 810-2250-2.
Replaces Brinkmann factory part# 072-2500-0
Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2
$14.41
810-2250-2 (Pro Series 2250) Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31
USA shipping for orders of gas grill parts of $49 or more for Brinkmann gas BBQ grills (contiguous 48 states only)