Home > Brinkmann Grill Models > Brinkmann 810-2390-S
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Part diagrams and owners manuals for Brinkmann model: 810-2390-S
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement BBQ grill parts for Brinkmann model: 810-2390-S
810-2390-S Burners
stainless steel straight pipe burner for Brinkmann model 810-2390-S.
Replaces Brinkmann factory part# 154-2390-0
Part Number: 12391
Dimensions: 21 1/4” x 1”
Material: stainless steel
Weight: 0.7
$35.18
810-2390-S Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of three (3).
Part Number: 62393
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 24 3/4”
Material: matte cast iron
Weight: 12.2
$82.03
810-2390-S Heat Distribution Plates
Porcelain steel heat distribution plate. Sold individually.
Replaces Brinkmann factory part# 600-2390-3
Part Number: 92391
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 4”
Material: porcelain steel
Weight: 1.0
$22.46
810-2390-S Igniter Components
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
Electrode with a 23 1/2” wire and has a male connector with a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Brinkmann factory part# 116-2390-0
Part Number: 02390
Material: ceramic
Weight: 0.1
$11.25
810-2390-S Heat indicators and Meat Thermometers
heat indicator for Brinkmann model 810-2390-S.
Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2
$14.41
810-2390-S Accessories
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31