Home > Brinkmann Grill Models > Brinkmann 810-4415-TGrill Zone 4415 - 4 Burner Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Brinkmann grill.
Part diagrams and owners manuals for Brinkmann model: 810-4415-T
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement gas grill parts for Brinkmann model: 810-4415-T
810-4415-T Burners
Stainless steel burner for Brinkmann model 810-4415-T.
Replaces Brinkmann factory part# 154-4415-4
Part Number: BMTB2
Dimensions: 14 1/4
Material: stainless steel
Weight: 1.0
$35.43
Stainless steel burner suppor rail with crossover tubes for Brinkmann model 810-4415-T.
Replaces Brinkmann factory part# 600-4415-6
Part Number: BMBR2
Dimensions: 25 1/8
Material: stainless steel
Weight: 0.7
$50.61
810-4415-T Cooking Grids
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies.
Replaces Brinkmann factory part# 115-4415-0
Part Number: 60663-1PC
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 6.7
$49.38
810-4415-T Flame Tamers
Stainless steel Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Brinkmann factory part# 600-4415-T
Part Number: CLA-TS0001
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 0.7
$16.99
SET OF FOUR/4 PACK Stainless steel Flame Tamer. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0001-X4
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 2.8
$60.26
810-4415-T Heat Tents
Porcelain steel Heat Tents. Sold as a set of two (2).
Part Number: 90252
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 24 1/2”
Material: porcelain steel
Weight: 5.8
$82.67 $55.99
Porcelain steel Heat Tent. Single piece.
Part Number: 90252-1PC
Dimension Front-to-Back: 11 3/4”
Dimension Side-to-Side: 12 1/4”
Material: porcelain steel
Weight: 3.5
$29.99 $29.24
810-4415-T Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box, ceramic electrode, insulating sleeve, and 14” wire with female space connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Brinkmann factory part# 600-4419-B
Part Number: 08300
Material: ceramic
Weight: 0.3
$13.92
810-4415-T Heat indicators and Meat Thermometers
heat indicator for Brinkmann model 810-4415-T.
Replaces Brinkmann factory part# 072-2400-0
Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2
$14.41
810-4415-T Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73